What are the key features of Texas Instruments LM4030CMFX-2.5/NOPB?

This product belongs to the Voltage References category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for LM4030CMFX-2.5/NOPB?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does LM4030CMFX-2.5/NOPB work?

This device follows established Voltage References design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of LM4030CMFX-2.5/NOPB?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for LM4030CMFX-2.5/NOPB?

The global Voltage References market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments LM4030CMFX-2.5/NOPB is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of LM4030CMFX-2.5/NOPB?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

LM4030CMFX-2.5/NOPB Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB by Texas Instruments

LM4030CMFX-2.5/NOPB | Texas Instruments Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB

Category: Voltage References

Brand: Texas Instruments

Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB

Technical Parameters

Application	Signal Processing
Brand	Texas Instruments
Category	Voltage References
Data Tier	Family Level
Description	Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Analog IC
RoHS	Compliant
Series	LM
Standard Pack Qty	3000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LM4030CMFX-2.5/NOPB Application and Selection Guide

LM4030CMFX-2.5/NOPB Model and Manufacturer Information

LM4030CMFX-2.5/NOPB, a Voltage References manufactured by Texas Instruments: LM4030CMFX-2.5/NOPB helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether LM4030CMFX-2.5/NOPB meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB for further evaluation.

LM4030CMFX-2.5/NOPB Product Parameters and Description

The main parameters of Texas Instruments's Voltage References product LM4030CMFX-2.5/NOPB include Voltage References Ultra-high-precision shunt voltage refer A 926-LM4030CMF25NOPB. This is a Voltage References produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LM4030CMFX-2.5/NOPB Application and Selection Reference

Texas Instruments's Voltage References product LM4030CMFX-2.5/NOPB has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LM4030CMFX-2.5/NOPB is a Voltage References solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LM4030CMFX-2.5/NOPB

Designers looking for LM4030CMFX-2.5/NOPB recommended parts can evaluate the following options. LM4030CMFX-2.5/NOPB selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LMP8640HV-FEVAL/NOPB	Texas Instruments	BOARD EVALUATION LMP8640
LMV331M7	Texas Instruments	IC COMP TINY LOW VOLT SC-70-5
TCAN3413DR	Texas Instruments	CAN Interface IC 3.3-V CAN FD transce iver with flexible

EZKEY can provide LM4030CMFX-2.5/NOPB recommended part comparison data and engineering samples for evaluation.