What are the key features of Texas Instruments TCAN3413DR?

This product belongs to the CAN Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TCAN3413DR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TCAN3413DR work?

This device follows established CAN Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TCAN3413DR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TCAN3413DR?

The global CAN Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TCAN3413DR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TCAN3413DR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TCAN3413DR CAN Interface IC 3.3-V CAN FD transce iver with flexible by Texas Instruments

TCAN3413DR | Texas Instruments CAN Interface IC 3.3-V CAN FD transce iver with flexible

Category: CAN Interface IC

Brand: Texas Instruments

CAN Interface IC 3.3-V CAN FD transce iver with flexible

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CAN Interface IC 3.3-V CAN FD transce iver with flexible

Technical Parameters

Application	Interface
Brand	Texas Instruments
Category	CAN Interface IC
Data Tier	General Description
Description	CAN Interface IC 3.3-V CAN FD transce iver with flexible
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Interface IC
RoHS	Compliant
Series	TI Interface
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TCAN3413DR Application and Selection Guide

TCAN3413DR Model and Manufacturer Information

TCAN3413DR, a CAN Interface IC manufactured by Texas Instruments: TCAN3413DR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TCAN3413DR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to CAN Interface IC 3.3-V CAN FD transce iver with flexible for further evaluation.

TCAN3413DR Product Parameters and Description

The main parameters of Texas Instruments's CAN Interface IC product TCAN3413DR include CAN Interface IC 3.3-V CAN FD transce iver with flexible. This is a CAN Interface IC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TCAN3413DR Application and Selection Reference

Texas Instruments's CAN Interface IC product TCAN3413DR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TCAN3413DR is a CAN Interface IC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TCAN3413DR

Designers looking for TCAN3413DR recommended parts can evaluate the following options. TCAN3413DR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LM5013QDDARQ1	Texas Instruments	开关稳压器 6-V to 100-V input, 3.5-A non-synchronous buck DC/DC converter with ultra-low quiescent current (IQ)
LMZ12003EXTTZ/NOPB	Texas Instruments	IC BUCK SYNC ADJ 3A TO-PMOD-7
ISO7840DWW	Texas Instruments	DGTL ISO 5.7KV 4CH 16SOIC

EZKEY can provide TCAN3413DR recommended part comparison data and engineering samples for evaluation.