Question 1

What are the key features of Vishay Semiconductor Opto Division VCNL4040M3OE-H3?

EZKEY · Accepted Answer

This product belongs to the Sensor Interface category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Semiconductor Opto Division with full traceability.

Question 2

What are the main application scenarios for VCNL4040M3OE-H3?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does VCNL4040M3OE-H3 work?

EZKEY · Accepted Answer

This device follows established Sensor Interface design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of VCNL4040M3OE-H3?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for VCNL4040M3OE-H3?

EZKEY · Accepted Answer

The global Sensor Interface market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Semiconductor Opto Division VCNL4040M3OE-H3 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of VCNL4040M3OE-H3?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Semiconductor Opto Division provides full technical support and reference designs.

Application	General Purpose
Brand	Vishay Semiconductor Opto Division
Category	Sensor Interface
Data Tier	General Description
Description	Sensor Interface Amb Lt Snsr w/IR Emt w/I2C Intf 16bit
Lead Free	Yes
Manufacturer	Vishay Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-55 to +150 C
Packaging	Reel
Product Type	Electronic Component
RoHS	Compliant
Series	Vishay
Standard Pack Qty	1500

Recommended Part	Brand	Description
VSMB294008G	Vishay Semiconductor Opto Division	EMITTER IR 940NM 100MA SMD
VEMD2023SLX01	Vishay Semiconductor Opto Division	PHOTO PIN DIODE SMD SIDE LOOKER
SFH6186-2T	Vishay Semiconductor Opto Division	OPTOISOLATOR 5.3KV TRANS 4-SMD

VCNL4040M3OE-H3 | Vishay Semiconductor Opto Division Sensor Interface Amb Lt Snsr w/IR Emt w/I2C Intf 16bit

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

VCNL4040M3OE-H3 Application and Selection Guide

VCNL4040M3OE-H3 Model and Manufacturer Information

VCNL4040M3OE-H3 Product Parameters and Description

VCNL4040M3OE-H3 Application and Selection Reference

Recommended Part Numbers for VCNL4040M3OE-H3