Question 1

What are the key features of Vishay Dale VB30100S-E3/4W?

EZKEY · Accepted Answer

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Dale with full traceability.

Question 2

What are the main application scenarios for VB30100S-E3/4W?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does VB30100S-E3/4W work?

EZKEY · Accepted Answer

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of VB30100S-E3/4W?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for VB30100S-E3/4W?

EZKEY · Accepted Answer

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Dale VB30100S-E3/4W is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of VB30100S-E3/4W?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Dale provides full technical support and reference designs.

Application	General Purpose
Brand	Vishay Dale
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +150 C
Packaging	Tape & Reel
Product Type	Electronic Component
RoHS	Compliant
Series	Vishay

Recommended Part	Brand	Description
IHLP2525AHER1R0M01	Vishay Dale	FIXED IND 1UH 7A 18.3 MOHM SMD
RN60C71R5FB14	Vishay Dale	RES 71.5 OHM 1/4W 1% AXIAL
UXB02075G5001FC100	Vishay Dale	Resistor Ultra Precision Metal Film 5k Ohm 1% 1/4W ±5ppm/°C Conformal PC Pin T/R - Ammo Pack (Alt: UXB02075G5001FC100)

VB30100S-E3/4W | Vishay Dale 肖特基二极管与整流器 30 Amp 100 Volt Single TrenchMOS

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

VB30100S-E3/4W Application and Selection Guide

VB30100S-E3/4W Model and Manufacturer Information

VB30100S-E3/4W Product Parameters and Description

VB30100S-E3/4W Application and Selection Reference

Recommended Part Numbers for VB30100S-E3/4W