Question 1

What are the key features of Vishay Intertechnologies V15PM15-M3/H?

EZKEY · Accepted Answer

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Intertechnologies with full traceability.

Question 2

What are the main application scenarios for V15PM15-M3/H?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does V15PM15-M3/H work?

EZKEY · Accepted Answer

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of V15PM15-M3/H?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for V15PM15-M3/H?

EZKEY · Accepted Answer

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Intertechnologies V15PM15-M3/H is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of V15PM15-M3/H?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Intertechnologies provides full technical support and reference designs.

Application	General Purpose
Brand	Vishay Intertechnologies
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +150 C
Packaging	Tape & Reel
Product Type	Electronic Component
RoHS	Compliant
Series	Vishay

Recommended Part	Brand	Description
HCTF235L280000BR00	Vishay Intertechnologies	Fuse Cartridge 80A 24V High Current 2-Pin Thru-Hole T/R - Tape and Reel
MMUO1020C6800FB300	Vishay Intertechnologies	MELF Resistors 0.2W 680ohms 1% 0102 MELF 150V 50ppm RoHS: Compliant
T52E5476M025C0055	Vishay Intertechnologies	Tantalum Capacitors - Polymer 47uF 25volts 20% 55mohms maxESR

V15PM15-M3/H | Vishay Intertechnologies Diode Schottky 15A 3-Pin TO-277A T/R (Alt: V15PM15-M3/H)

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

V15PM15-M3/H Application and Selection Guide

V15PM15-M3/H Model and Manufacturer Information

V15PM15-M3/H Product Parameters and Description

V15PM15-M3/H Application and Selection Reference

Recommended Part Numbers for V15PM15-M3/H