Question 1

What are the key features of Texas Instruments TPS76930DBVT?

EZKEY · Accepted Answer

This product belongs to the Power Management Specialized - PMIC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

Question 2

What are the main application scenarios for TPS76930DBVT?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does TPS76930DBVT work?

EZKEY · Accepted Answer

This device follows established Power Management Specialized - PMIC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of TPS76930DBVT?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for TPS76930DBVT?

EZKEY · Accepted Answer

The global Power Management Specialized - PMIC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TPS76930DBVT is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of TPS76930DBVT?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

Brand	Texas Instruments
Data Tier	Family Level
ECCN	EAR99
Efficiency	Up to 95%
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Output Voltage	Adjustable
Package / Case	SOIC-8
Packaging	Tape & Reel
Product Type	Switching Regulator
REACH	Compliant
RoHS	Compliant
Series	TPS76930
Synchronous Rectification	No
Topology	DC/DC Converter

Recommended Part	Brand	Description
OPA170ASDRLTEP	Texas Instruments	IC OPAMP GP 1.2MHZ RRO 5SOT
TPS54821RHLR	Texas Instruments	IC REG BUCK SYNC ADJ 8A 14QFN
TPS78433QDBVRQ1	Texas Instruments	LDO 稳压器 POS 3.3V 0.3A 汽车级 5 引脚 SOT-23 T/R

TPS76930DBVT | Texas Instruments IC REG LINEAR 3V 100MA SOT23-5

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

TPS76930DBVT Application and Selection Guide

TPS76930DBVT Model and Manufacturer Information

TPS76930DBVT Product Parameters and Description

TPS76930DBVT Application and Selection Reference

Recommended Part Numbers for TPS76930DBVT