What are the key features of Texas Instruments TPS22950CQDDCRQ1?

This product belongs to the Power Management Specialized - PMIC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TPS22950CQDDCRQ1?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TPS22950CQDDCRQ1 work?

This device follows established Power Management Specialized - PMIC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TPS22950CQDDCRQ1?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TPS22950CQDDCRQ1?

The global Power Management Specialized - PMIC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TPS22950CQDDCRQ1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TPS22950CQDDCRQ1?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TPS22950CQDDCRQ1 电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit by Texas Instruments

TPS22950CQDDCRQ1 | Texas Instruments 电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit

Category: Power Management Specialized - PMIC

Brand: Texas Instruments

电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit

Technical Parameters

Brand	Texas Instruments
Data Tier	Family Level
ECCN	EAR99
Efficiency	Up to 95%
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Output Voltage	Adjustable
Package / Case	SOIC-8
Packaging	Tape & Reel
Product Type	Switching Regulator
REACH	Compliant
RoHS	Compliant
Series	TPS22950
Synchronous Rectification	No
Topology	DC/DC Converter

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TPS22950CQDDCRQ1 Application and Selection Guide

TPS22950CQDDCRQ1 Model and Manufacturer Information

TPS22950CQDDCRQ1, a Power Management Specialized - PMIC manufactured by Texas Instruments: TPS22950CQDDCRQ1 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TPS22950CQDDCRQ1 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to 电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit for further evaluation.

TPS22950CQDDCRQ1 Product Parameters and Description

The main parameters of Texas Instruments's Power Management Specialized - PMIC product TPS22950CQDDCRQ1 include 电源开关 IC - 配电 Automotive 5.5-V, 2.7-A, 34-mO load switch with adjustable current limit. This is a Power Management Specialized - PMIC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TPS22950CQDDCRQ1 Application and Selection Reference

Texas Instruments's Power Management Specialized - PMIC product TPS22950CQDDCRQ1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TPS22950CQDDCRQ1 is a Power Management Specialized - PMIC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TPS22950CQDDCRQ1

Designers looking for TPS22950CQDDCRQ1 recommended parts can evaluate the following options. TPS22950CQDDCRQ1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TPS62808YKAR	Texas Instruments	POWER MANAGEMENT
OPA376AQDBVRQ1	Texas Instruments	IC OPAMP GP 5.5MHZ LN SOT23-5
TPS62A02PDDCR	Texas Instruments

EZKEY can provide TPS22950CQDDCRQ1 recommended part comparison data and engineering samples for evaluation.