What are the key features of Texas Instruments TPS22948DCKR?

This product belongs to the Power Management Specialized - PMIC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TPS22948DCKR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TPS22948DCKR work?

This device follows established Power Management Specialized - PMIC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TPS22948DCKR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TPS22948DCKR?

The global Power Management Specialized - PMIC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TPS22948DCKR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TPS22948DCKR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TPS22948DCKR 5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking by Texas Instruments

TPS22948DCKR | Texas Instruments 5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking

Category: Power Management Specialized - PMIC

Brand: Texas Instruments

5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking

Technical Parameters

Brand	Texas Instruments
Data Tier	Family Level
ECCN	EAR99
Efficiency	Up to 95%
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Output Voltage	Adjustable
Package / Case	SOIC-8
Packaging	Tape & Reel
Product Type	Switching Regulator
REACH	Compliant
RoHS	Compliant
Series	TPS22948
Synchronous Rectification	No
Topology	DC/DC Converter

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TPS22948DCKR Application and Selection Guide

TPS22948DCKR Model and Manufacturer Information

TPS22948DCKR, a Power Management Specialized - PMIC manufactured by Texas Instruments: TPS22948DCKR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TPS22948DCKR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to 5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking for further evaluation.

TPS22948DCKR Product Parameters and Description

The main parameters of Texas Instruments's Power Management Specialized - PMIC product TPS22948DCKR include 5.5-V, 0.24-A, 300-mΩ, load switch with reverse current blocking. This is a Power Management Specialized - PMIC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TPS22948DCKR Application and Selection Reference

Texas Instruments's Power Management Specialized - PMIC product TPS22948DCKR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TPS22948DCKR is a Power Management Specialized - PMIC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TPS22948DCKR

Designers looking for TPS22948DCKR recommended parts can evaluate the following options. TPS22948DCKR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
OPA2379AIDCNT	Texas Instruments	IC OPAMP GP 90KHZ RRO SOT23-8
TPS54540BQDDAQ1	Texas Instruments	TPS54540BQDDAQ1
TPS92411DBVR	Texas Instruments	LED Lighting Drivers Floating Switch for Offline AC LEDs

EZKEY can provide TPS22948DCKR recommended part comparison data and engineering samples for evaluation.