What are the key features of Texas Instruments TMP112D3IDPWR?

This product belongs to the Board Mount Temperature Sensors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TMP112D3IDPWR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TMP112D3IDPWR work?

This device follows established Board Mount Temperature Sensors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TMP112D3IDPWR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TMP112D3IDPWR?

The global Board Mount Temperature Sensors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TMP112D3IDPWR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TMP112D3IDPWR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TMP112D3IDPWR Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w by Texas Instruments

TMP112D3IDPWR | Texas Instruments Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w

Category: Board Mount Temperature Sensors

Brand: Texas Instruments

Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w

Technical Parameters

Application	General Purpose
Brand	Texas Instruments
Category	Board Mount Temperature Sensors
Data Tier	General Description
Description	Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Integrated Circuit
RoHS	Compliant
Series	TI
Standard Pack Qty	3000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TMP112D3IDPWR Application and Selection Guide

TMP112D3IDPWR Model and Manufacturer Information

TMP112D3IDPWR, a Board Mount Temperature Sensors manufactured by Texas Instruments: TMP112D3IDPWR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TMP112D3IDPWR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w for further evaluation.

TMP112D3IDPWR Product Parameters and Description

The main parameters of Texas Instruments's Board Mount Temperature Sensors product TMP112D3IDPWR include Board Mount Temperature Sensors +/-0.5C accurate IC temperature sensor w. This is a Board Mount Temperature Sensors produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TMP112D3IDPWR Application and Selection Reference

Texas Instruments's Board Mount Temperature Sensors product TMP112D3IDPWR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TMP112D3IDPWR is a Board Mount Temperature Sensors solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TMP112D3IDPWR

Designers looking for TMP112D3IDPWR recommended parts can evaluate the following options. TMP112D3IDPWR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
PS2553DBVT-1	Texas Instruments	//
UCC27321QDRQ1	Texas Instruments	IC MOSFET DVR 9A SGL HS 8SOIC
UCD74120RVFR	Texas Instruments	IC REG BUCK 25A SYNC 40LQFN

EZKEY can provide TMP112D3IDPWR recommended part comparison data and engineering samples for evaluation.