What are the key features of Texas Instruments TLC7226IDWR?

This product belongs to the Digital to Analog Converters - DAC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TLC7226IDWR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TLC7226IDWR work?

This device follows established Digital to Analog Converters - DAC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TLC7226IDWR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TLC7226IDWR?

The global Digital to Analog Converters - DAC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TLC7226IDWR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TLC7226IDWR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TLC7226IDWR Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW by Texas Instruments

TLC7226IDWR | Texas Instruments Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW

Category: Digital to Analog Converters - DAC

Brand: Texas Instruments

Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW

Technical Parameters

Application	Signal Processing
Brand	Texas Instruments
Category	Digital to Analog Converters - DAC
Data Tier	Family Level
Description	Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Analog IC
RoHS	Compliant
Series	TL
Standard Pack Qty	2000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TLC7226IDWR Application and Selection Guide

TLC7226IDWR Model and Manufacturer Information

TLC7226IDWR, a Digital to Analog Converters - DAC manufactured by Texas Instruments: TLC7226IDWR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TLC7226IDWR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW for further evaluation.

TLC7226IDWR Product Parameters and Description

The main parameters of Texas Instruments's Digital to Analog Converters - DAC product TLC7226IDWR include Digital to Analog Converters - DAC Quad Parallel-In Sng l/Dual Sply A 595-T A 595-TLC7226IDW. This is a Digital to Analog Converters - DAC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TLC7226IDWR Application and Selection Reference

Texas Instruments's Digital to Analog Converters - DAC product TLC7226IDWR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TLC7226IDWR is a Digital to Analog Converters - DAC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TLC7226IDWR

Designers looking for TLC7226IDWR recommended parts can evaluate the following options. TLC7226IDWR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LM4040C25IDBZR	Texas Instruments	IC VREF SHUNT 2.5V SOT23-3
LM358DRG3	Texas Instruments	IC OPAMP GP 700KHZ DUAL 8SOIC
LMP8480MME-S/NOPB	Texas Instruments	IC OPAMP CURR SENS 270KHZ 8VSSOP

EZKEY can provide TLC7226IDWR recommended part comparison data and engineering samples for evaluation.