What are the key features of NXP Semiconductors TJA1448CTK/0Z?

This product belongs to the CAN Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for TJA1448CTK/0Z?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TJA1448CTK/0Z work?

This device follows established CAN Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TJA1448CTK/0Z?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TJA1448CTK/0Z?

The global CAN Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors TJA1448CTK/0Z is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TJA1448CTK/0Z?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

TJA1448CTK/0Z CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition by NXP Semiconductors

TJA1448CTK/0Z | NXP Semiconductors CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition

Category: CAN Interface IC

Brand: NXP Semiconductors

CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition

Technical Parameters

Application	Automotive Networking
Brand	NXP Semiconductors
Category	CAN Interface IC
Data Tier	Family Level
Description	CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition
Manufacturer	NXP Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	CAN Transceiver
Protocol	CAN / CAN FD
RoHS	Compliant
Series	TJA
Standard Pack Qty	6000
Supply Voltage	4.5 V to 5.5 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 TJA1448CTK/0Z Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/NXP-Semiconductors/TJA1448CTK-0Z?qs=eP2BKZSCXI6BXroO3S%252Bxeg%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TJA1448CTK/0Z Application and Selection Guide

TJA1448CTK/0Z Model and Manufacturer Information

TJA1448CTK/0Z, a CAN Interface IC manufactured by NXP Semiconductors: TJA1448CTK/0Z helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether TJA1448CTK/0Z meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition for further evaluation.

TJA1448CTK/0Z Product Parameters and Description

The main parameters of NXP Semiconductors's CAN Interface IC product TJA1448CTK/0Z include CAN Interface IC Dual High-speed CAN transceiver with Standby mode and wake-up source recognition. This is a CAN Interface IC produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TJA1448CTK/0Z Application and Selection Reference

NXP Semiconductors's CAN Interface IC product TJA1448CTK/0Z has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TJA1448CTK/0Z is a CAN Interface IC solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TJA1448CTK/0Z

Designers looking for TJA1448CTK/0Z recommended parts can evaluate the following options. TJA1448CTK/0Z selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
NX1029X,115	NXP Semiconductors	MOSFET NRND for Automotive Applications NX1029X/SOT666/SOT6
P82B715TD,118	NXP Semiconductors
TJA1041AT,518	NXP Semiconductors	IC TRANSCEIVER HALF 1/1 14SO

EZKEY can provide TJA1448CTK/0Z recommended part comparison data and engineering samples for evaluation.