What are the key features of Texas Instruments TCAN3404DRBRQ1?

This product belongs to the CAN Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for TCAN3404DRBRQ1?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does TCAN3404DRBRQ1 work?

This device follows established CAN Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of TCAN3404DRBRQ1?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for TCAN3404DRBRQ1?

The global CAN Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments TCAN3404DRBRQ1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of TCAN3404DRBRQ1?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

TCAN3404DRBRQ1 CAN Interface IC Automotive 3.3V CAN flexible-data-rate ( by Texas Instruments

TCAN3404DRBRQ1 | Texas Instruments CAN Interface IC Automotive 3.3V CAN flexible-data-rate (

Category: CAN Interface IC

Brand: Texas Instruments

CAN Interface IC Automotive 3.3V CAN flexible-data-rate (

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CAN Interface IC Automotive 3.3V CAN flexible-data-rate (

Technical Parameters

Application	Interface
Brand	Texas Instruments
Category	CAN Interface IC
Data Tier	General Description
Description	CAN Interface IC Automotive 3.3V CAN flexible-data-rate (
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Interface IC
RoHS	Compliant
Series	TI Interface
Standard Pack Qty	3000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TCAN3404DRBRQ1 Application and Selection Guide

TCAN3404DRBRQ1 Model and Manufacturer Information

TCAN3404DRBRQ1, a CAN Interface IC manufactured by Texas Instruments: TCAN3404DRBRQ1 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TCAN3404DRBRQ1 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to CAN Interface IC Automotive 3.3V CAN flexible-data-rate ( for further evaluation.

TCAN3404DRBRQ1 Product Parameters and Description

The main parameters of Texas Instruments's CAN Interface IC product TCAN3404DRBRQ1 include CAN Interface IC Automotive 3.3V CAN flexible-data-rate (. This is a CAN Interface IC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TCAN3404DRBRQ1 Application and Selection Reference

Texas Instruments's CAN Interface IC product TCAN3404DRBRQ1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TCAN3404DRBRQ1 is a CAN Interface IC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TCAN3404DRBRQ1

Designers looking for TCAN3404DRBRQ1 recommended parts can evaluate the following options. TCAN3404DRBRQ1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ISO6760DWR	Texas Instruments	GENERAL PURPOSE, 50-MBPS, SIX-CH
LM3671TLX-ADJ/NOPB	Texas Instruments	IC REG BUCK SYNC ADJ 0.6A 5USMD
ISO7761QDWQ1	Texas Instruments	数字隔离器 Automotive, robust EMC, six-channel, 5/1, reinforced digital isolator 16-SOIC -40 to 125

EZKEY can provide TCAN3404DRBRQ1 recommended part comparison data and engineering samples for evaluation.