ST4-40-2.50-L-D-P-TR Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header by Samtec Inc

ST4-40-2.50-L-D-P-TR | Samtec Inc Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header

Name: ST4-40-2.50-L-D-P-TR
Brand: Samtec Inc
SKU: ST4-40-2.50-L-D-P-TR

Category: Board to Board & Mezzanine Connectors

Brand: Samtec Inc

Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header

Technical Parameters

Category	Board to Board & Mezzanine Connectors
Description	Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header
Manufacturer	Samtec
Packaging	Reel
Standard Pack Qty	850

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ST4-40-2.50-L-D-P-TR Application and Selection Guide

ST4-40-2.50-L-D-P-TR Model and Manufacturer Information

ST4-40-2.50-L-D-P-TR, a Board to Board & Mezzanine Connectors manufactured by Samtec: ST4-40-2.50-L-D-P-TR helps you confirm the specific model, while Samtec helps you confirm the product source. If you are selecting a part, you can first check whether ST4-40-2.50-L-D-P-TR meets your requirements, then check whether Samtec matches your expectations, and then refer to Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header for further evaluation.

ST4-40-2.50-L-D-P-TR Product Parameters and Description

The main parameters of Samtec's Board to Board & Mezzanine Connectors product ST4-40-2.50-L-D-P-TR include Board to Board & Mezzanine Connectors 0.40 mm Micro Blade & Beam Ultra Fine Pitch Header. This is a Board to Board & Mezzanine Connectors produced by Samtec, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ST4-40-2.50-L-D-P-TR Application and Selection Reference

Samtec's Board to Board & Mezzanine Connectors product ST4-40-2.50-L-D-P-TR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ST4-40-2.50-L-D-P-TR is a Board to Board & Mezzanine Connectors solution worth considering, and manufacturer Samtec provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ST4-40-2.50-L-D-P-TR

Designers looking for ST4-40-2.50-L-D-P-TR recommended parts can evaluate the following options. ST4-40-2.50-L-D-P-TR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
QSH-030-01-F-D-EM2-TR	Samtec Inc	Board to Board & Mezzanine Connectors
ERF8-025-05.0-L-DV-TR	Samtec Inc	Board to Board & Mezzanine Connectors 0.80 mm Edge Rate Rugged High Speed Socket
SEAF-30-07.5-L-04-2-A-K-FR	Samtec Inc	Board to Board & Mezzanine Connectors .050 SEARAY High-Speed High-Density Open-Pin-Field Array Socket

EZKEY can provide ST4-40-2.50-L-D-P-TR recommended part comparison data and engineering samples for evaluation.