Question 1

What are the key features of STMicroelectronics SPC564A80L7CFAY?

EZKEY · Accepted Answer

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by STMicroelectronics with full traceability.

Question 2

What are the main application scenarios for SPC564A80L7CFAY?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does SPC564A80L7CFAY work?

EZKEY · Accepted Answer

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of SPC564A80L7CFAY?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for SPC564A80L7CFAY?

EZKEY · Accepted Answer

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. STMicroelectronics SPC564A80L7CFAY is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of SPC564A80L7CFAY?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, STMicroelectronics provides full technical support and reference designs.

Application	General Purpose
Brand	STMicroelectronics
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Semiconductor Component
RoHS	Compliant
Series	ST

Recommended Part	Brand	Description
M95640-DFMN6TP	STMicroelectronics	EEPROM 64-Kbit SPI bus EEPROM with high-speed clock
L6920DTR	STMicroelectronics	IC REG BOOST SYNC 8TSSOP
TL064CDT	STMicroelectronics	IC AMP LP J-FET QUAD OP 14 SOIC

SPC564A80L7CFAY | STMicroelectronics MCU 32-bit SPC564A80x e200 RISC 4096KB Flash 1.2V/3.3V/5V 176-Pin LQFP Tray

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

SPC564A80L7CFAY Application and Selection Guide

SPC564A80L7CFAY Model and Manufacturer Information

SPC564A80L7CFAY Product Parameters and Description

SPC564A80L7CFAY Application and Selection Reference

Recommended Part Numbers for SPC564A80L7CFAY