What are the key features of Texas Instruments SN75ALS176BDR?

This product belongs to the RS-422/RS-485 Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for SN75ALS176BDR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does SN75ALS176BDR work?

This device follows established RS-422/RS-485 Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of SN75ALS176BDR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for SN75ALS176BDR?

The global RS-422/RS-485 Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments SN75ALS176BDR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of SN75ALS176BDR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

SN75ALS176BDR RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD by Texas Instruments

SN75ALS176BDR | Texas Instruments RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD

Category: RS-422/RS-485 Interface IC

Brand: Texas Instruments

RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD

Technical Parameters

Application	Interface / Buffer
Brand	Texas Instruments
Category	RS-422/RS-485 Interface IC
Data Tier	Family Level
Description	RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Interface / Buffer IC
RoHS	Compliant
Series	SN
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

SN75ALS176BDR Application and Selection Guide

SN75ALS176BDR Model and Manufacturer Information

SN75ALS176BDR, a RS-422/RS-485 Interface IC manufactured by Texas Instruments: SN75ALS176BDR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether SN75ALS176BDR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD for further evaluation.

SN75ALS176BDR Product Parameters and Description

The main parameters of Texas Instruments's RS-422/RS-485 Interface IC product SN75ALS176BDR include RS-422/RS-485 Interface IC Differential Bus Tra nsceiver A 595-SN75 A 595-SN75ALS176BD. This is a RS-422/RS-485 Interface IC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

SN75ALS176BDR Application and Selection Reference

Texas Instruments's RS-422/RS-485 Interface IC product SN75ALS176BDR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, SN75ALS176BDR is a RS-422/RS-485 Interface IC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for SN75ALS176BDR

Designers looking for SN75ALS176BDR recommended parts can evaluate the following options. SN75ALS176BDR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
DS90LV028AQMA/NOPB	Texas Instruments	IC LINE RCVR LVDS DUAL 3V 8SOIC
DRV91670TPHPR	Texas Instruments	-
DRV5033AJQLPG	Texas Instruments	MAGNETIC SWITCH OMNIPOLAR TO92-3

EZKEY can provide SN75ALS176BDR recommended part comparison data and engineering samples for evaluation.