Question 1

What are the key features of Texas Instruments SN74HC165N?

EZKEY · Accepted Answer

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

Question 2

What are the main application scenarios for SN74HC165N?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does SN74HC165N work?

EZKEY · Accepted Answer

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of SN74HC165N?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for SN74HC165N?

EZKEY · Accepted Answer

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments SN74HC165N is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of SN74HC165N?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

Brand	NXP Semiconductors
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Input Logic Level	CMOS
Logic Family	HC
Logic Function	Shift Register (Parallel Load)
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature	-40 to +85 C
Output Type	Push-Pull
Packaging	Tape & Reel
Product Type	Logic IC
REACH	Compliant
RoHS	Compliant
Series	74HC
Supply Voltage	2 V to 6 V

Recommended Part	Brand	Description
LM324N	Texas Instruments	IC OPAMP GP 1.2MHZ 14DIP
PCA9535PW	Texas Instruments	IC I/O EXPANDER I2C 16B 24TSSOP
SN74LVC1G125DBVR	Texas Instruments	IC BUS BUFF TRI-ST N-INV SOT23-5

SN74HC165N | Texas Instruments IC 8-BIT SHIFT REGISTER 16-DIP

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

SN74HC165N Application and Selection Guide

SN74HC165N Model and Manufacturer Information

SN74HC165N Product Parameters and Description

SN74HC165N Application and Selection Reference

Recommended Part Numbers for SN74HC165N