What are the key features of Texas Instruments SN65HVD266DR?

This product belongs to the CAN Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for SN65HVD266DR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does SN65HVD266DR work?

This device follows established CAN Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of SN65HVD266DR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for SN65HVD266DR?

The global CAN Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments SN65HVD266DR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of SN65HVD266DR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

SN65HVD266DR CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D by Texas Instruments

SN65HVD266DR | Texas Instruments CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D

Category: CAN Interface IC

Brand: Texas Instruments

CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D

Technical Parameters

Application	Interface / Buffer
Brand	Texas Instruments
Category	CAN Interface IC
Data Tier	Family Level
Description	CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Interface / Buffer IC
RoHS	Compliant
Series	SN
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

SN65HVD266DR Application and Selection Guide

SN65HVD266DR Model and Manufacturer Information

SN65HVD266DR, a CAN Interface IC manufactured by Texas Instruments: SN65HVD266DR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether SN65HVD266DR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D for further evaluation.

SN65HVD266DR Product Parameters and Description

The main parameters of Texas Instruments's CAN Interface IC product SN65HVD266DR include CAN Interface IC Turbo CAN Tnsceiver for CAN FD A 595-SN6 A 595-SN65HVD266D. This is a CAN Interface IC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

SN65HVD266DR Application and Selection Reference

Texas Instruments's CAN Interface IC product SN65HVD266DR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, SN65HVD266DR is a CAN Interface IC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for SN65HVD266DR

Designers looking for SN65HVD266DR recommended parts can evaluate the following options. SN65HVD266DR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
DAC6574IDGS	Texas Instruments	IC DAC 10-BIT QUAD I2C 10-MSOP
SN65HVD21DR	Texas Instruments	IC TXRX RS485 EXT MODE 8-SOIC
SN75452BPS	Texas Instruments	LOGIC GATES AND INVERTERS

EZKEY can provide SN65HVD266DR recommended part comparison data and engineering samples for evaluation.