What are the key features of Lattice SII9022ACNUTR?

This product belongs to the Lattice category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Lattice with full traceability.

What are the main application scenarios for SII9022ACNUTR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does SII9022ACNUTR work?

This device follows established Lattice design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of SII9022ACNUTR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for SII9022ACNUTR?

The global Lattice market is growing at ~6-8% CAGR, with particularly strong demand in power management. Lattice SII9022ACNUTR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of SII9022ACNUTR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Lattice provides full technical support and reference designs.

SII9022ACNUTR Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN by Lattice

SII9022ACNUTR | Lattice Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN

Category: Lattice

Brand: Lattice

Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN

Technical Parameters

Application	General Purpose
Brand	Lattice
Category	Lattice
Data Tier	General Description
Description	Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Lattice
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

SII9022ACNUTR Application and Selection Guide

SII9022ACNUTR Model and Manufacturer Information

SII9022ACNUTR, a Lattice manufactured by Lattice: SII9022ACNUTR helps you confirm the specific model, while Lattice helps you confirm the product source. If you are selecting a part, you can first check whether SII9022ACNUTR meets your requirements, then check whether Lattice matches your expectations, and then refer to Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN for further evaluation.

SII9022ACNUTR Product Parameters and Description

The main parameters of Lattice's Lattice product SII9022ACNUTR include Lattice 24-Bit RGB Input HDMI 1.4a Transmitter, 1080p@60Hz, no HDCP, 72-pin QFN. This is a Lattice produced by Lattice, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

SII9022ACNUTR Application and Selection Reference

Lattice's Lattice product SII9022ACNUTR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, SII9022ACNUTR is a Lattice solution worth considering, and manufacturer Lattice provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for SII9022ACNUTR

Designers looking for SII9022ACNUTR recommended parts can evaluate the following options. SII9022ACNUTR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LIFCL-40-8MG121C	Lattice	FPGA - Field Programmable Gate Array Lattice CrossLink -NX Embedded Vision Bridging & Processing FPGA with 2.5G MIPI D-PHY
LFXP2-8E-5FTN256I	Lattice	FPGA - Field Programmable Gate Array 8K LUTs 201 I/O Inst on DSP 1.2V -5 Spd
LIFCL-17-8MG121C	Lattice	FPGA - Field Programmable Gate Array Lattice CrossLink -NX Embedded Vision Bridging & Processing FPGA with 2.5G MIPI D-PHY

EZKEY can provide SII9022ACNUTR recommended part comparison data and engineering samples for evaluation.