What are the key features of NXP S912XET256W1MALR?

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP with full traceability.

What are the main application scenarios for S912XET256W1MALR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does S912XET256W1MALR work?

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of S912XET256W1MALR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for S912XET256W1MALR?

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP S912XET256W1MALR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of S912XET256W1MALR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP provides full technical support and reference designs.

S912XET256W1MALR 16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112 by NXP

S912XET256W1MALR | NXP 16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112

Category: General Purpose Semiconductors

Brand: NXP

16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112

Technical Parameters

Application	General Purpose
Brand	NXP
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Semiconductor Component
RoHS	Compliant
Series	NXP

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

S912XET256W1MALR Application and Selection Guide

S912XET256W1MALR Model and Manufacturer Information

S912XET256W1MALR, a General Purpose Semiconductors manufactured by NXP: S912XET256W1MALR helps you confirm the specific model, while NXP helps you confirm the product source. If you are selecting a part, you can first check whether S912XET256W1MALR meets your requirements, then check whether NXP matches your expectations, and then refer to 16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112 for further evaluation.

S912XET256W1MALR Product Parameters and Description

The main parameters of NXP's General Purpose Semiconductors product S912XET256W1MALR include 16位微控制器 - MCU 16-bit MCU, S12X core, 256KB Flash, 50MHz, -40/+125degC, Automotive Qualified, QFP 112. This is a General Purpose Semiconductors produced by NXP, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

S912XET256W1MALR Application and Selection Reference

NXP's General Purpose Semiconductors product S912XET256W1MALR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, S912XET256W1MALR is a General Purpose Semiconductors solution worth considering, and manufacturer NXP provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for S912XET256W1MALR

Designers looking for S912XET256W1MALR recommended parts can evaluate the following options. S912XET256W1MALR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
S912ZVCA64F0MLFR	NXP	16位微控制器 - MCU MagniV 16-bit MCU, S12Z core, 64KB Flash, 32MHz, -40/+125degC, Automotive Qualified, QFP 48
TEA8918BAT/1J	NXP	RESONANT POWER SUPPLY WITH PFC
MC56F81768VLH	NXP	DIGITAL SIGNAL PROCESSOR, CONTROLLER

EZKEY can provide S912XET256W1MALR recommended part comparison data and engineering samples for evaluation.