What are the key features of Microchip Technology PIC18F6722T-I/PT?

This product belongs to the 8-bit Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Microchip Technology with full traceability.

What are the main application scenarios for PIC18F6722T-I/PT?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does PIC18F6722T-I/PT work?

This device follows established 8-bit Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of PIC18F6722T-I/PT?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for PIC18F6722T-I/PT?

The global 8-bit Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. Microchip Technology PIC18F6722T-I/PT is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of PIC18F6722T-I/PT?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Microchip Technology provides full technical support and reference designs.

PIC18F6722T-I/PT 8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O by Microchip Technology

PIC18F6722T-I/PT | Microchip Technology 8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O

Category: 8-bit Microcontrollers - MCU

Brand: Microchip Technology

8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O

Technical Parameters

ADC	10-bit / 12-bit
Brand	Microchip Technology
Category	8-bit Microcontrollers - MCU
Data Bus Width	8-bit
Data Tier	Family Level
Description	8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O
ECCN	EAR99
Halogen Free	Yes
Interface	I2C / SPI / UART
Manufacturer	Microchip Technology
Mounting Type	Through Hole
Operating Temperature	-40 to +85 C
Package / Case	PDIP
Packaging	Reel
Product Type	Microcontroller (MCU)
REACH	Compliant
RoHS	Compliant
Series	PIC18F
Standard Pack Qty	1200
Supply Voltage	2 V to 5.5 V
Timers	8-bit / 16-bit

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 PIC18F6722T-I/PT Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Microchip-Technology/PIC18F6722T-I-PT?qs=V%2FyyTCAHA4DRcQzpD6PPYA%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

PIC18F6722T-I/PT Application and Selection Guide

PIC18F6722T-I/PT Model and Manufacturer Information

PIC18F6722T-I/PT, a 8-bit Microcontrollers - MCU manufactured by Microchip Technology: PIC18F6722T-I/PT helps you confirm the specific model, while Microchip Technology helps you confirm the product source. If you are selecting a part, you can first check whether PIC18F6722T-I/PT meets your requirements, then check whether Microchip Technology matches your expectations, and then refer to 8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O for further evaluation.

PIC18F6722T-I/PT Product Parameters and Description

The main parameters of Microchip Technology's 8-bit Microcontrollers - MCU product PIC18F6722T-I/PT include 8-bit Microcontrollers - MCU 128 KB FL 4K RAM 70 I/O. This is a 8-bit Microcontrollers - MCU produced by Microchip Technology, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

PIC18F6722T-I/PT Application and Selection Reference

Microchip Technology's 8-bit Microcontrollers - MCU product PIC18F6722T-I/PT has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, PIC18F6722T-I/PT is a 8-bit Microcontrollers - MCU solution worth considering, and manufacturer Microchip Technology provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for PIC18F6722T-I/PT

Designers looking for PIC18F6722T-I/PT recommended parts can evaluate the following options. PIC18F6722T-I/PT selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCP6024T-E/SL	Microchip Technology	IC OPAMP QUAD 2.3V 10MHZ 14SOIC
MCV08A-I/P	Microchip Technology	-
MIC94067YML-TR	Microchip Technology	IC PWR SWITCH DUAL HI SIDE 8-MLF

EZKEY can provide PIC18F6722T-I/PT recommended part comparison data and engineering samples for evaluation.