What are the key features of Microchip Technology Inc PIC18F26K80T-E/MM?

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Microchip Technology Inc with full traceability.

What are the main application scenarios for PIC18F26K80T-E/MM?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does PIC18F26K80T-E/MM work?

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of PIC18F26K80T-E/MM?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for PIC18F26K80T-E/MM?

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Microchip Technology Inc PIC18F26K80T-E/MM is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of PIC18F26K80T-E/MM?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Microchip Technology Inc provides full technical support and reference designs.

PIC18F26K80T-E/MM 64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN by Microchip Technology Inc

PIC18F26K80T-E/MM | Microchip Technology Inc 64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN

Category: General Purpose

Brand: Microchip Technology Inc

64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN

Technical Parameters

ADC	10-bit / 12-bit
Brand	Microchip Technology Inc
Data Bus Width	8-bit
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Interface	I2C / SPI / UART
Mounting Type	Surface Mount
Operating Temperature	-40 to +85 C
Packaging	Tube
Product Type	Microcontroller (MCU)
REACH	Compliant
RoHS	Compliant
Series	PIC18F
Supply Voltage	2 V to 5.5 V
Timers	8-bit / 16-bit

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

PIC18F26K80T-E/MM Application and Selection Guide

PIC18F26K80T-E/MM Model and Manufacturer Information

PIC18F26K80T-E/MM, a General Purpose manufactured by Microchip Technology Inc: PIC18F26K80T-E/MM helps you confirm the specific model, while Microchip Technology Inc helps you confirm the product source. If you are selecting a part, you can first check whether PIC18F26K80T-E/MM meets your requirements, then check whether Microchip Technology Inc matches your expectations, and then refer to 64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN for further evaluation.

PIC18F26K80T-E/MM Product Parameters and Description

The main parameters of Microchip Technology Inc's General Purpose product PIC18F26K80T-E/MM include 64KB Flash 4KB RAM 16 MIPS 12-bit ADC CTMU CAN. This is a General Purpose produced by Microchip Technology Inc, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

PIC18F26K80T-E/MM Application and Selection Reference

Microchip Technology Inc's General Purpose product PIC18F26K80T-E/MM has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, PIC18F26K80T-E/MM is a General Purpose solution worth considering, and manufacturer Microchip Technology Inc provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for PIC18F26K80T-E/MM

Designers looking for PIC18F26K80T-E/MM recommended parts can evaluate the following options. PIC18F26K80T-E/MM selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCP14A0902T-E/MS	Microchip Technology Inc	MOSFET Driver 4.5V to 18V 9A 2-Output Non-Inverting 8-Pin MSOP T/R - Tape and Reel
PIC18F26Q10-I/SS	Microchip Technology Inc	MCU 8-bit PIC RISC 64KB Flash 2.5V/3.3V/5V 28-Pin SSOP Tube
M2S005S-VFG256IH0211	Microchip Technology Inc	IC SOC CORTEX-M3 166MHZ 256FBGA

EZKEY can provide PIC18F26K80T-E/MM recommended part comparison data and engineering samples for evaluation.