What are the key features of Microchip Technology PIC16F1937-I/MV?

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Microchip Technology with full traceability.

What are the main application scenarios for PIC16F1937-I/MV?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does PIC16F1937-I/MV work?

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of PIC16F1937-I/MV?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for PIC16F1937-I/MV?

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Microchip Technology PIC16F1937-I/MV is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of PIC16F1937-I/MV?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Microchip Technology provides full technical support and reference designs.

PIC16F1937-I/MV MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube by Microchip Technology

PIC16F1937-I/MV | Microchip Technology MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube

Category: General Purpose

Brand: Microchip Technology

MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube

Technical Parameters

ADC	10-bit / 12-bit
Brand	Microchip Technology
Data Bus Width	8-bit
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Interface	I2C / SPI / UART
Mounting Type	Surface Mount
Operating Temperature	-40 to +85 C
Packaging	Tube
Product Type	Microcontroller (MCU)
REACH	Compliant
RoHS	Compliant
Series	PIC16F
Supply Voltage	2 V to 5.5 V
Timers	8-bit / 16-bit

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

PIC16F1937-I/MV Application and Selection Guide

PIC16F1937-I/MV Model and Manufacturer Information

PIC16F1937-I/MV, a General Purpose manufactured by Microchip Technology: PIC16F1937-I/MV helps you confirm the specific model, while Microchip Technology helps you confirm the product source. If you are selecting a part, you can first check whether PIC16F1937-I/MV meets your requirements, then check whether Microchip Technology matches your expectations, and then refer to MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube for further evaluation.

PIC16F1937-I/MV Product Parameters and Description

The main parameters of Microchip Technology's General Purpose product PIC16F1937-I/MV include MCU 8-bit PIC16 PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 40-Pin UQFN EP Tube. This is a General Purpose produced by Microchip Technology, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

PIC16F1937-I/MV Application and Selection Reference

Microchip Technology's General Purpose product PIC16F1937-I/MV has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, PIC16F1937-I/MV is a General Purpose solution worth considering, and manufacturer Microchip Technology provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for PIC16F1937-I/MV

Designers looking for PIC16F1937-I/MV recommended parts can evaluate the following options. PIC16F1937-I/MV selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MIC803-46D4VM3-TR	Microchip Technology	IC MPU SUPERVISOR SOT-23-3
MCP6542T-I/SN	Microchip Technology	IC COMP PUSHPULL 1.6V DUAL 8SOIC
PIC18F4585-I/PT	Microchip Technology	IC MCU FLASH 24KX16 44TQFP

EZKEY can provide PIC16F1937-I/MV recommended part comparison data and engineering samples for evaluation.