What are the key features of NXP Semiconductors PCA9555D,112?

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for PCA9555D,112?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does PCA9555D,112 work?

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of PCA9555D,112?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for PCA9555D,112?

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors PCA9555D,112 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of PCA9555D,112?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

PCA9555D,112 PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24 by NXP Semiconductors

PCA9555D,112 | NXP Semiconductors PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24

Category: General Purpose Semiconductors

Brand: NXP Semiconductors

PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24

Technical Parameters

Brand	NXP Semiconductors
Clock Frequency	400 kHz (Max)
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Interface	I2C
Interrupt Output	Yes
Mounting Type	Surface Mount
Number of Channels	8
Operating Temperature	-40 to +85 C
Package / Case	SOIC
Packaging	Tape & Reel
Product Type	I2C Multiplexer
REACH	Compliant
RoHS	Compliant
Series	PCA9555
Supply Voltage	2.3 V to 5.5 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

PCA9555D,112 Application and Selection Guide

PCA9555D,112 Model and Manufacturer Information

PCA9555D,112, a General Purpose Semiconductors manufactured by NXP Semiconductors: PCA9555D,112 helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether PCA9555D,112 meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24 for further evaluation.

PCA9555D,112 Product Parameters and Description

The main parameters of NXP Semiconductors's General Purpose Semiconductors product PCA9555D,112 include PCA9555 Series 5.5 V 160 mA 400 kHz 16-bit I2C-bus and SMBus I/O Port-SOIC-24. This is a General Purpose Semiconductors produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

PCA9555D,112 Application and Selection Reference

NXP Semiconductors's General Purpose Semiconductors product PCA9555D,112 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, PCA9555D,112 is a General Purpose Semiconductors solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for PCA9555D,112

Designers looking for PCA9555D,112 recommended parts can evaluate the following options. PCA9555D,112 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
SGTL5000XNAA3/R2	NXP Semiconductors	IC AUDIO CODEC STEREO 32-QFN
MIMX8MN3CVPIZAA	NXP Semiconductors	Processors - Application Specialized i.MX 8M Nano UltraLite Dual
PCA9509GM	NXP Semiconductors	IC SPECIALTY INTERFACE CIRCUIT, PQCC8, 1.60 X 1.60 MM, 0.50 MM HEIGHT, PLASTIC, MO-255, SOT902-1, XQFN-8, Interface IC:Other

EZKEY can provide PCA9555D,112 recommended part comparison data and engineering samples for evaluation.