What are the key features of NXP Semiconductors PCA9505DGGY?

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for PCA9505DGGY?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does PCA9505DGGY work?

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of PCA9505DGGY?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for PCA9505DGGY?

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors PCA9505DGGY is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of PCA9505DGGY?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

PCA9505DGGY 接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT by NXP Semiconductors

PCA9505DGGY | NXP Semiconductors 接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT

Category: General Purpose Semiconductors

Brand: NXP Semiconductors

接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT

Technical Parameters

Brand	NXP Semiconductors
Clock Frequency	400 kHz (Max)
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Interface	I2C
Interrupt Output	Yes
Mounting Type	Surface Mount
Number of Channels	8
Operating Temperature	-40 to +85 C
Package / Case	SOIC
Packaging	Tape & Reel
Product Type	I2C Multiplexer
REACH	Compliant
RoHS	Compliant
Series	PCA9505
Supply Voltage	2.3 V to 5.5 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

PCA9505DGGY Application and Selection Guide

PCA9505DGGY Model and Manufacturer Information

PCA9505DGGY, a General Purpose Semiconductors manufactured by NXP Semiconductors: PCA9505DGGY helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether PCA9505DGGY meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to 接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT for further evaluation.

PCA9505DGGY Product Parameters and Description

The main parameters of NXP Semiconductors's General Purpose Semiconductors product PCA9505DGGY include 接口-I/O扩展器 40-bit I2C-bus I/O port with RESET, OE and INT. This is a General Purpose Semiconductors produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

PCA9505DGGY Application and Selection Reference

NXP Semiconductors's General Purpose Semiconductors product PCA9505DGGY has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, PCA9505DGGY is a General Purpose Semiconductors solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for PCA9505DGGY

Designers looking for PCA9505DGGY recommended parts can evaluate the following options. PCA9505DGGY selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
SC34PF8100FREP	NXP Semiconductors
SPC5744PEK1AMLQ9	NXP Semiconductors	144-pin LQFP
PCA82C250T/YM	NXP Semiconductors

EZKEY can provide PCA9505DGGY recommended part comparison data and engineering samples for evaluation.