What are the key features of Texas Instruments OPA4992IPWR?

This product belongs to the Operational Amplifiers - Op Amps category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for OPA4992IPWR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does OPA4992IPWR work?

This device follows established Operational Amplifiers - Op Amps design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of OPA4992IPWR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for OPA4992IPWR?

The global Operational Amplifiers - Op Amps market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments OPA4992IPWR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of OPA4992IPWR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

OPA4992IPWR Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input by Texas Instruments

OPA4992IPWR | Texas Instruments Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input

Category: Operational Amplifiers - Op Amps

Brand: Texas Instruments

Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input

Technical Parameters

Application	Power / Signal Chain
Brand	Texas Instruments
Category	Operational Amplifiers - Op Amps
Data Tier	Family Level
Description	Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Power / Analog IC
RoHS	Compliant
Series	OPA
Standard Pack Qty	3000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

OPA4992IPWR Application and Selection Guide

OPA4992IPWR Model and Manufacturer Information

OPA4992IPWR, a Operational Amplifiers - Op Amps manufactured by Texas Instruments: OPA4992IPWR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether OPA4992IPWR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input for further evaluation.

OPA4992IPWR Product Parameters and Description

The main parameters of Texas Instruments's Operational Amplifiers - Op Amps product OPA4992IPWR include Operational Amplifiers - Op Amps Quad 40-V 10.6-MHz r ail-to-rail input. This is a Operational Amplifiers - Op Amps produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

OPA4992IPWR Application and Selection Reference

Texas Instruments's Operational Amplifiers - Op Amps product OPA4992IPWR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, OPA4992IPWR is a Operational Amplifiers - Op Amps solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for OPA4992IPWR

Designers looking for OPA4992IPWR recommended parts can evaluate the following options. OPA4992IPWR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TPS61282AYFFR	Texas Instruments	IC REG BST PROG 3.3A SYNC 16CSP
OPA2365AQDRQ1	Texas Instruments	IC OPAMP GP 50MHZ RRO 8SOIC
TPS2560ADRCT	Texas Instruments	IC PWR DIST SWITCH ADJ DL 10SON

EZKEY can provide OPA4992IPWR recommended part comparison data and engineering samples for evaluation.