What are the key features of Texas Instruments OPA2991QDGKRQ1?

This product belongs to the Operational Amplifiers - Op Amps category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for OPA2991QDGKRQ1?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does OPA2991QDGKRQ1 work?

This device follows established Operational Amplifiers - Op Amps design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of OPA2991QDGKRQ1?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for OPA2991QDGKRQ1?

The global Operational Amplifiers - Op Amps market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments OPA2991QDGKRQ1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of OPA2991QDGKRQ1?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

OPA2991QDGKRQ1 Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power by Texas Instruments

OPA2991QDGKRQ1 | Texas Instruments Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power

Category: Operational Amplifiers - Op Amps

Brand: Texas Instruments

Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power

Technical Parameters

Application	Power / Signal Chain
Brand	Texas Instruments
Category	Operational Amplifiers - Op Amps
Data Tier	Family Level
Description	Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Power / Analog IC
RoHS	Compliant
Series	OPA
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

OPA2991QDGKRQ1 Application and Selection Guide

OPA2991QDGKRQ1 Model and Manufacturer Information

OPA2991QDGKRQ1, a Operational Amplifiers - Op Amps manufactured by Texas Instruments: OPA2991QDGKRQ1 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether OPA2991QDGKRQ1 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power for further evaluation.

OPA2991QDGKRQ1 Product Parameters and Description

The main parameters of Texas Instruments's Operational Amplifiers - Op Amps product OPA2991QDGKRQ1 include Operational Amplifiers - Op Amps Automotive dual 40 - V 4.5-MHz low-power. This is a Operational Amplifiers - Op Amps produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

OPA2991QDGKRQ1 Application and Selection Reference

Texas Instruments's Operational Amplifiers - Op Amps product OPA2991QDGKRQ1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, OPA2991QDGKRQ1 is a Operational Amplifiers - Op Amps solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for OPA2991QDGKRQ1

Designers looking for OPA2991QDGKRQ1 recommended parts can evaluate the following options. OPA2991QDGKRQ1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TPS51124RGET	Texas Instruments	IC REG CTRLR BUCK PWM 24-QFN
OPA2180IDR	Texas Instruments	IC OPAMP ZERO-DRIFT 2MHZ 8SOIC
MSP430G2444IRHA40R	Texas Instruments	IC MCU 16BIT 16KB FLASH 40-VQFN

EZKEY can provide OPA2991QDGKRQ1 recommended part comparison data and engineering samples for evaluation.