What are the key features of TDK Corporation MPU-9250?

This product belongs to the IMUs - Inertial Measurement Units category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by TDK Corporation with full traceability.

What are the main application scenarios for MPU-9250?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MPU-9250 work?

This device follows established IMUs - Inertial Measurement Units design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MPU-9250?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MPU-9250?

The global IMUs - Inertial Measurement Units market is growing at ~6-8% CAGR, with particularly strong demand in power management. TDK Corporation MPU-9250 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MPU-9250?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, TDK Corporation provides full technical support and reference designs.

MPU-9250 IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948 by TDK Corporation

MPU-9250 | TDK Corporation IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948

Category: IMUs - Inertial Measurement Units

Brand: TDK Corporation

IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948

Technical Parameters

Application	General Purpose
Brand	InvenSense
Category	IMUs - Inertial Measurement Units
Data Tier	General Description
Description	IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	TDK InvenSense
Packaging	Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	5000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MPU-9250 Application and Selection Guide

MPU-9250 Model and Manufacturer Information

MPU-9250, a IMUs - Inertial Measurement Units manufactured by InvenSense: MPU-9250 helps you confirm the specific model, while InvenSense helps you confirm the product source. If you are selecting a part, you can first check whether MPU-9250 meets your requirements, then check whether InvenSense matches your expectations, and then refer to IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948 for further evaluation.

MPU-9250 Product Parameters and Description

The main parameters of InvenSense's IMUs - Inertial Measurement Units product MPU-9250 include IMUs - Inertial Measurement Units RECOMMENDED ALT 410-ICM-20948. This is a IMUs - Inertial Measurement Units produced by InvenSense, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MPU-9250 Application and Selection Reference

InvenSense's IMUs - Inertial Measurement Units product MPU-9250 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MPU-9250 is a IMUs - Inertial Measurement Units solution worth considering, and manufacturer InvenSense provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MPU-9250

Designers looking for MPU-9250 recommended parts can evaluate the following options. MPU-9250 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MLP2520S1R5MT0S1	TDK Corporation	FIXED IND 1.5UH 1.2A 90 MOHM SMD
MLG0603P8N2HT000	TDK Corporation	FIXED IND 8.2NH 250MA 850 MOHM
VLP6045LT-100M	TDK Corporation	Power Inductors - SMD RECOMMENDED ALT 810-VLS6045EX-100M

EZKEY can provide MPU-9250 recommended part comparison data and engineering samples for evaluation.