What are the key features of TDK Corporation MLP2520H4R7ST0S1?

This product belongs to the Power Inductors - SMD category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by TDK Corporation with full traceability.

What are the main application scenarios for MLP2520H4R7ST0S1?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MLP2520H4R7ST0S1 work?

This device follows established Power Inductors - SMD design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MLP2520H4R7ST0S1?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MLP2520H4R7ST0S1?

The global Power Inductors - SMD market is growing at ~6-8% CAGR, with particularly strong demand in power management. TDK Corporation MLP2520H4R7ST0S1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MLP2520H4R7ST0S1?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, TDK Corporation provides full technical support and reference designs.

MLP2520H4R7ST0S1 Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1 by TDK Corporation

MLP2520H4R7ST0S1 | TDK Corporation Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1

Category: Power Inductors - SMD

Brand: TDK Corporation

Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1

Technical Parameters

Application	General Purpose
Brand	TDK Corporation
Category	Power Inductors - SMD
Data Tier	General Description
Description	Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1
Lead Free	Yes
Manufacturer	TDK
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Electronic Component
RoHS	Compliant
Series	TDK
Standard Pack Qty	3000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MLP2520H4R7ST0S1 Application and Selection Guide

MLP2520H4R7ST0S1 Model and Manufacturer Information

MLP2520H4R7ST0S1, a Power Inductors - SMD manufactured by TDK Corporation: MLP2520H4R7ST0S1 helps you confirm the specific model, while TDK Corporation helps you confirm the product source. If you are selecting a part, you can first check whether MLP2520H4R7ST0S1 meets your requirements, then check whether TDK Corporation matches your expectations, and then refer to Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1 for further evaluation.

MLP2520H4R7ST0S1 Product Parameters and Description

The main parameters of TDK Corporation's Power Inductors - SMD product MLP2520H4R7ST0S1 include Power Inductors - SMD SUGGESTED ALTERNATE MLP2520S4R7ST0S1. This is a Power Inductors - SMD produced by TDK Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MLP2520H4R7ST0S1 Application and Selection Reference

TDK Corporation's Power Inductors - SMD product MLP2520H4R7ST0S1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MLP2520H4R7ST0S1 is a Power Inductors - SMD solution worth considering, and manufacturer TDK Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MLP2520H4R7ST0S1

Designers looking for MLP2520H4R7ST0S1 recommended parts can evaluate the following options. MLP2520H4R7ST0S1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MLP2016S1R0MT0S1	TDK Corporation	FIXED IND 1UH 1.4A 90 MOHM SMD
MLP1608V1R0BT0S1	TDK Corporation	FIXED IND 1UH 700MA 300 MOHM SMD
MMICT5838-00-012	TDK Corporation	MEMS Microphones Bottom Port PDM Digital Output Multi-Mode Microphone

EZKEY can provide MLP2520H4R7ST0S1 recommended part comparison data and engineering samples for evaluation.