What are the key features of NXP Semiconductors MKE15Z64VFP4?

This product belongs to the ARM Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for MKE15Z64VFP4?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MKE15Z64VFP4 work?

This device follows established ARM Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MKE15Z64VFP4?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MKE15Z64VFP4?

The global ARM Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors MKE15Z64VFP4 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MKE15Z64VFP4?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

MKE15Z64VFP4 ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI) by NXP Semiconductors

MKE15Z64VFP4 | NXP Semiconductors ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI)

Category: ARM Microcontrollers - MCU

Brand: NXP Semiconductors

ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI)

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI)

Technical Parameters

Application	General Purpose
Brand	NXP Semiconductors
Category	ARM Microcontrollers - MCU
Data Tier	General Description
Description	ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI)
Lead Free	Yes
Manufacturer	NXP Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Semiconductor Component
RoHS	Compliant
Series	NXP
Standard Pack Qty	490

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MKE15Z64VFP4 Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/NXP-Semiconductors/MKE15Z64VFP4?qs=7MVldsJ5UayWB4XOSajn6A%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MKE15Z64VFP4 Application and Selection Guide

MKE15Z64VFP4 Model and Manufacturer Information

MKE15Z64VFP4, a ARM Microcontrollers - MCU manufactured by NXP Semiconductors: MKE15Z64VFP4 helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether MKE15Z64VFP4 meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI) for further evaluation.

MKE15Z64VFP4 Product Parameters and Description

The main parameters of NXP Semiconductors's ARM Microcontrollers - MCU product MKE15Z64VFP4 include ARM Microcontrollers - MCU 48MHz, 5V Main Stream CM0+ MCU with NXP Touch (TSI). This is a ARM Microcontrollers - MCU produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MKE15Z64VFP4 Application and Selection Reference

NXP Semiconductors's ARM Microcontrollers - MCU product MKE15Z64VFP4 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MKE15Z64VFP4 is a ARM Microcontrollers - MCU solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MKE15Z64VFP4

Designers looking for MKE15Z64VFP4 recommended parts can evaluate the following options. MKE15Z64VFP4 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
PCA9518APW,512	NXP Semiconductors	IC I2C HUB 5CH EXPANDBL 20-TSSOP
MC33GD3100EKR2	NXP Semiconductors	Advanced IGBT Gate Driver 5V 32-Pin SOIC W T/R - Tape and Reel (Alt: MC33GD3100EKR2)
LX2080SE71826B	NXP SEMICONDUCTORS

EZKEY can provide MKE15Z64VFP4 recommended part comparison data and engineering samples for evaluation.