MCR18EZPJ102 RES SMD 1K OHM 5% 1/4W 1206 by Rohm Semiconductor

MCR18EZPJ102 | Rohm Semiconductor RES SMD 1K OHM 5% 1/4W 1206

Name: MCR18EZPJ102
Brand: Rohm Semiconductor
SKU: MCR18EZPJ102

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES SMD 1K OHM 5% 1/4W 1206

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES SMD 1K OHM 5% 1/4W 1206

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	1206
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.25 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	1 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	3.2 x 1.6 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-5%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR18EZPJ102 Application and Selection Guide

MCR18EZPJ102 Model and Manufacturer Information

MCR18EZPJ102, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR18EZPJ102 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR18EZPJ102 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES SMD 1K OHM 5% 1/4W 1206 for further evaluation.

MCR18EZPJ102 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR18EZPJ102 include RES SMD 1K OHM 5% 1/4W 1206. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR18EZPJ102 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR18EZPJ102 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR18EZPJ102 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR18EZPJ102

Designers looking for MCR18EZPJ102 recommended parts can evaluate the following options. MCR18EZPJ102 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR01MZPF2001	Rohm Semiconductor	RES 2K OHM 1/16W 1% 0402 SMD
MCR1000PJ000	ROHM Semiconductor
MCR03EZPF202	Rohm Semiconductor	-

EZKEY can provide MCR18EZPJ102 recommended part comparison data and engineering samples for evaluation.