MCR18EZHJ102 RES 1K OHM 1/4W 5% 1206 SMD by Rohm Semiconductor

MCR18EZHJ102 | Rohm Semiconductor RES 1K OHM 1/4W 5% 1206 SMD

Name: MCR18EZHJ102
Brand: Rohm Semiconductor
SKU: MCR18EZHJ102

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES 1K OHM 1/4W 5% 1206 SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES 1K OHM 1/4W 5% 1206 SMD

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	1206
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.25 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	1 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	3.2 x 1.6 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-5%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR18EZHJ102 Application and Selection Guide

MCR18EZHJ102 Model and Manufacturer Information

MCR18EZHJ102, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR18EZHJ102 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR18EZHJ102 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES 1K OHM 1/4W 5% 1206 SMD for further evaluation.

MCR18EZHJ102 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR18EZHJ102 include RES 1K OHM 1/4W 5% 1206 SMD. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR18EZHJ102 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR18EZHJ102 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR18EZHJ102 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR18EZHJ102

Designers looking for MCR18EZHJ102 recommended parts can evaluate the following options. MCR18EZHJ102 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR03EZPFX2402	Rohm Semiconductor	RES SMD 24K OHM 1% 1/10W 0603
MCR18EZPF24R0	Rohm Semiconductor	RES SMD 24 OHM 1% 1/4W 1206
MCR03EZPFX51R1	Rohm Semiconductor	RES SMD 51.1 OHM 1% 1/10W 0603

EZKEY can provide MCR18EZHJ102 recommended part comparison data and engineering samples for evaluation.