MCR10EZPJ302 RES SMD 3K OHM 5% 1/8W 0805 by Rohm Semiconductor

MCR10EZPJ302 | Rohm Semiconductor RES SMD 3K OHM 5% 1/8W 0805

Name: MCR10EZPJ302
Brand: Rohm Semiconductor
SKU: MCR10EZPJ302

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES SMD 3K OHM 5% 1/8W 0805

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES SMD 3K OHM 5% 1/8W 0805

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	0805
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.125 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	3 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	2.0 x 1.25 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-5%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR10EZPJ302 Application and Selection Guide

MCR10EZPJ302 Model and Manufacturer Information

MCR10EZPJ302, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR10EZPJ302 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR10EZPJ302 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES SMD 3K OHM 5% 1/8W 0805 for further evaluation.

MCR10EZPJ302 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR10EZPJ302 include RES SMD 3K OHM 5% 1/8W 0805. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR10EZPJ302 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR10EZPJ302 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR10EZPJ302 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR10EZPJ302

Designers looking for MCR10EZPJ302 recommended parts can evaluate the following options. MCR10EZPJ302 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR03ERTF1212	Rohm Semiconductor	RES 12.1K OHM 1/10W 1% 0603 SMD
MCR01MRTJ101	Rohm Semiconductor	RES 100 OHM 1/16W 5% 0402 SMD
MCR25JZHJ820	Rohm Semiconductor	RES 82 OHM 1/4W 5% 1210 SMD

EZKEY can provide MCR10EZPJ302 recommended part comparison data and engineering samples for evaluation.