MCR03EZPFX1872 RES SMD 18.7K OHM 1% 1/10W 0603 by Rohm Semiconductor

MCR03EZPFX1872 | Rohm Semiconductor RES SMD 18.7K OHM 1% 1/10W 0603

Name: MCR03EZPFX1872
Brand: Rohm Semiconductor
SKU: MCR03EZPFX1872

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES SMD 18.7K OHM 1% 1/10W 0603

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES SMD 18.7K OHM 1% 1/10W 0603

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	0603
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.1 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	18 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	1.6 x 0.8 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-1%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR03EZPFX1872 Application and Selection Guide

MCR03EZPFX1872 Model and Manufacturer Information

MCR03EZPFX1872, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR03EZPFX1872 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR03EZPFX1872 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES SMD 18.7K OHM 1% 1/10W 0603 for further evaluation.

MCR03EZPFX1872 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03EZPFX1872 include RES SMD 18.7K OHM 1% 1/10W 0603. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR03EZPFX1872 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03EZPFX1872 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR03EZPFX1872 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR03EZPFX1872

Designers looking for MCR03EZPFX1872 recommended parts can evaluate the following options. MCR03EZPFX1872 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR01MZPF7502	ROHM Semiconductor	Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD
MCR006YRTF4701	Rohm Semiconductor	RES 4.7K OHM 1/20W 1% 0201 SMD
MCR006YZPF2872	Rohm Semiconductor	-

EZKEY can provide MCR03EZPFX1872 recommended part comparison data and engineering samples for evaluation.