MCR03ERTJ183 RES 18K OHM 1/10W 5% 0603 SMD by Rohm Semiconductor

MCR03ERTJ183 | Rohm Semiconductor RES 18K OHM 1/10W 5% 0603 SMD

Name: MCR03ERTJ183
Brand: Rohm Semiconductor
SKU: MCR03ERTJ183

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES 18K OHM 1/10W 5% 0603 SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES 18K OHM 1/10W 5% 0603 SMD

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	0603
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.1 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	18 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	1.6 x 0.8 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-0.01%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR03ERTJ183 Application and Selection Guide

MCR03ERTJ183 Model and Manufacturer Information

MCR03ERTJ183, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR03ERTJ183 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR03ERTJ183 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES 18K OHM 1/10W 5% 0603 SMD for further evaluation.

MCR03ERTJ183 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03ERTJ183 include RES 18K OHM 1/10W 5% 0603 SMD. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR03ERTJ183 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03ERTJ183 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR03ERTJ183 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR03ERTJ183

Designers looking for MCR03ERTJ183 recommended parts can evaluate the following options. MCR03ERTJ183 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR03EZPFX3000	Rohm Semiconductor	RES SMD 300 OHM 1% 1/10W 0603
MCR01MZPF1004	Rohm Semiconductor	RES 1M OHM 1/16W 1% 0402 SMD
MCR25JZHJ102	Rohm Semiconductor	RES SMD 1K OHM 5% 1/4W 1210

EZKEY can provide MCR03ERTJ183 recommended part comparison data and engineering samples for evaluation.