MCR01MZPF7502 Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD by ROHM Semiconductor

MCR01MZPF7502 | ROHM Semiconductor Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD

Name: MCR01MZPF7502
Brand: ROHM Semiconductor
SKU: MCR01MZPF7502

Category: Chip Resistors - Surface Mount

Brand: ROHM Semiconductor

Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD

Technical Parameters

Brand	ROHM Semiconductor
Case Code (Inch)	0201
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.05 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	75 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	0.6 x 0.3 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-20%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR01MZPF7502 Application and Selection Guide

MCR01MZPF7502 Model and Manufacturer Information

MCR01MZPF7502, a Chip Resistors - Surface Mount manufactured by ROHM Semiconductor: MCR01MZPF7502 helps you confirm the specific model, while ROHM Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR01MZPF7502 meets your requirements, then check whether ROHM Semiconductor matches your expectations, and then refer to Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD for further evaluation.

MCR01MZPF7502 Product Parameters and Description

The main parameters of ROHM Semiconductor's Chip Resistors - Surface Mount product MCR01MZPF7502 include Res Thick Film 0402 7.5K Ohm 1% 0.063W(1/16W) �}100ppm/C Epoxy Resin Pad SMD. This is a Chip Resistors - Surface Mount produced by ROHM Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR01MZPF7502 Application and Selection Reference

ROHM Semiconductor's Chip Resistors - Surface Mount product MCR01MZPF7502 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR01MZPF7502 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer ROHM Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR01MZPF7502

Designers looking for MCR01MZPF7502 recommended parts can evaluate the following options. MCR01MZPF7502 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR03EZPFX3162	Rohm Semiconductor	RES SMD 31.6K OHM 1% 1/10W 0603
MCR01MZPD6800	ROHM Semiconductor	--
MCR03ERTJ470	Rohm Semiconductor	RES SMD 47 OHM 5% 1/10W 0603

EZKEY can provide MCR01MZPF7502 recommended part comparison data and engineering samples for evaluation.