What are the key features of MICRO CHIP MCP3426A0-E/SN?

This product belongs to the Analog to Digital Converters - ADC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by MICRO CHIP with full traceability.

What are the main application scenarios for MCP3426A0-E/SN?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MCP3426A0-E/SN work?

This device follows established Analog to Digital Converters - ADC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MCP3426A0-E/SN?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MCP3426A0-E/SN?

The global Analog to Digital Converters - ADC market is growing at ~6-8% CAGR, with particularly strong demand in power management. MICRO CHIP MCP3426A0-E/SN is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MCP3426A0-E/SN?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, MICRO CHIP provides full technical support and reference designs.

MCP3426A0-E/SN Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps by MICRO CHIP

MCP3426A0-E/SN | MICRO CHIP Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps

Category: Analog to Digital Converters - ADC

Brand: MICRO CHIP

Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps

Technical Parameters

Application	General Purpose
Brand	MICRO CHIP
Category	Analog to Digital Converters - ADC
Data Tier	General Description
Description	Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Microchip Technology
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	100

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MCP3426A0-E/SN Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Microchip-Technology/MCP3426A0-E-SN?qs=icxrp76fIjCAC6FqOOR0uQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCP3426A0-E/SN Application and Selection Guide

MCP3426A0-E/SN Model and Manufacturer Information

MCP3426A0-E/SN, a Analog to Digital Converters - ADC manufactured by MICRO CHIP: MCP3426A0-E/SN helps you confirm the specific model, while MICRO CHIP helps you confirm the product source. If you are selecting a part, you can first check whether MCP3426A0-E/SN meets your requirements, then check whether MICRO CHIP matches your expectations, and then refer to Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps for further evaluation.

MCP3426A0-E/SN Product Parameters and Description

The main parameters of MICRO CHIP's Analog to Digital Converters - ADC product MCP3426A0-E/SN include Analog to Digital Converters - ADC 16-bit delta-sigma ADC dual chan 15sps. This is a Analog to Digital Converters - ADC produced by MICRO CHIP, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCP3426A0-E/SN Application and Selection Reference

MICRO CHIP's Analog to Digital Converters - ADC product MCP3426A0-E/SN has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCP3426A0-E/SN is a Analog to Digital Converters - ADC solution worth considering, and manufacturer MICRO CHIP provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCP3426A0-E/SN

Designers looking for MCP3426A0-E/SN recommended parts can evaluate the following options. MCP3426A0-E/SN selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
PIC18F458-I/PT	MICRO CHIP	8-bit Microcontrollers - MCU 32KB 1536 RAM 34 I/O
DSPIC33EP128GP504-I/PT	MICRO CHIP	General electronic component
MCP14A0455T-E/SN	MICRO CHIP	Gate Drivers 4.5A Low Side Dual Inv+Non-Inv Gate Drvr, SOIC-8

EZKEY can provide MCP3426A0-E/SN recommended part comparison data and engineering samples for evaluation.