What are the key features of NXP USA Inc. MC9S12DG128CPVER?

This product belongs to the 16-bit Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP USA Inc. with full traceability.

What are the main application scenarios for MC9S12DG128CPVER?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MC9S12DG128CPVER work?

This device follows established 16-bit Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MC9S12DG128CPVER?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MC9S12DG128CPVER?

The global 16-bit Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP USA Inc. MC9S12DG128CPVER is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MC9S12DG128CPVER?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP USA Inc. provides full technical support and reference designs.

MC9S12DG128CPVER 16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112 by NXP USA Inc.

MC9S12DG128CPVER | NXP USA Inc. 16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112

Category: 16-bit Microcontrollers - MCU

Brand: NXP USA Inc.

16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112

Technical Parameters

Application	General Purpose
Brand	NXP USA Inc.
Category	16-bit Microcontrollers - MCU
Data Tier	General Description
Description	16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112
Lead Free	Yes
Manufacturer	NXP Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Semiconductor Component
RoHS	Compliant
Series	NXP
Standard Pack Qty	500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MC9S12DG128CPVER Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/NXP-Semiconductors/MC9S12DG128CPVER?qs=e7A2guvi5TDGP4zU%252Bijpiw%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MC9S12DG128CPVER Application and Selection Guide

MC9S12DG128CPVER Model and Manufacturer Information

MC9S12DG128CPVER, a 16-bit Microcontrollers - MCU manufactured by NXP USA Inc.: MC9S12DG128CPVER helps you confirm the specific model, while NXP USA Inc. helps you confirm the product source. If you are selecting a part, you can first check whether MC9S12DG128CPVER meets your requirements, then check whether NXP USA Inc. matches your expectations, and then refer to 16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112 for further evaluation.

MC9S12DG128CPVER Product Parameters and Description

The main parameters of NXP USA Inc.'s 16-bit Microcontrollers - MCU product MC9S12DG128CPVER include 16-bit Microcontrollers - MCU S12DG 16-bit MCU, HCS12 core, 128KB Flash, QFP 112. This is a 16-bit Microcontrollers - MCU produced by NXP USA Inc., and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MC9S12DG128CPVER Application and Selection Reference

NXP USA Inc.'s 16-bit Microcontrollers - MCU product MC9S12DG128CPVER has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MC9S12DG128CPVER is a 16-bit Microcontrollers - MCU solution worth considering, and manufacturer NXP USA Inc. provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MC9S12DG128CPVER

Designers looking for MC9S12DG128CPVER recommended parts can evaluate the following options. MC9S12DG128CPVER selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MK60FN1M0VMD15	NXP USA Inc.	IC MCU 32BIT 1MB FLASH 144MAPBGA
PCA9508D,118	NXP USA Inc.	Interface - Signal Buffers, Repeaters Dual Supply Hot swappable level translating I2C-bus repeater
MCIMX6S6AVM08AD	NXP USA Inc.	I.MX6SOLO ROM PERF ENHAN

EZKEY can provide MC9S12DG128CPVER recommended part comparison data and engineering samples for evaluation.