What are the key features of NXP Semiconductors MC9S12C128VFUE?

This product belongs to the 16-bit Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for MC9S12C128VFUE?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MC9S12C128VFUE work?

This device follows established 16-bit Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MC9S12C128VFUE?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MC9S12C128VFUE?

The global 16-bit Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors MC9S12C128VFUE is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MC9S12C128VFUE?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

MC9S12C128VFUE 16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80 by NXP Semiconductors

MC9S12C128VFUE | NXP Semiconductors 16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80

Category: 16-bit Microcontrollers - MCU

Brand: NXP Semiconductors

16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80

Technical Parameters

Application	General Purpose
Brand	NXP Semiconductors
Category	16-bit Microcontrollers - MCU
Data Tier	General Description
Description	16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80
Lead Free	Yes
Manufacturer	NXP Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tray
Product Type	Semiconductor Component
RoHS	Compliant
Series	NXP
Standard Pack Qty	420

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MC9S12C128VFUE Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/NXP-Semiconductors/MC9S12C128VFUE?qs=bHF3aLPfLykaP5gVrCeuug%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MC9S12C128VFUE Application and Selection Guide

MC9S12C128VFUE Model and Manufacturer Information

MC9S12C128VFUE, a 16-bit Microcontrollers - MCU manufactured by NXP Semiconductors: MC9S12C128VFUE helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether MC9S12C128VFUE meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to 16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80 for further evaluation.

MC9S12C128VFUE Product Parameters and Description

The main parameters of NXP Semiconductors's 16-bit Microcontrollers - MCU product MC9S12C128VFUE include 16-bit Microcontrollers - MCU S12C 16-bit MCU, HCS12 core, 128KB Flash, QFP 80. This is a 16-bit Microcontrollers - MCU produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MC9S12C128VFUE Application and Selection Reference

NXP Semiconductors's 16-bit Microcontrollers - MCU product MC9S12C128VFUE has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MC9S12C128VFUE is a 16-bit Microcontrollers - MCU solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MC9S12C128VFUE

Designers looking for MC9S12C128VFUE recommended parts can evaluate the following options. MC9S12C128VFUE selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
PN5120A0HN1/C1,118	NXP Semiconductors
PMBT3946YPN,115	NXP Semiconductors	PMBT3946YPN Series 40 V 200 mA NPN/PNP General-Purpose Double Transistor-SOT-363
SC18IS606PWJ	NXP Semiconductors	Interface - Specialized I2C-bus to SPI bridge

EZKEY can provide MC9S12C128VFUE recommended part comparison data and engineering samples for evaluation.