What are the key features of Maxim Integrated MAX5250AEAP+?

This product belongs to the Digital to Analog Converters - DAC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Maxim Integrated with full traceability.

What are the main application scenarios for MAX5250AEAP+?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MAX5250AEAP+ work?

This device follows established Digital to Analog Converters - DAC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MAX5250AEAP+?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MAX5250AEAP+?

The global Digital to Analog Converters - DAC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Maxim Integrated MAX5250AEAP+ is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MAX5250AEAP+?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Maxim Integrated provides full technical support and reference designs.

MAX5250AEAP+ Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D by Maxim Integrated

MAX5250AEAP+ | Maxim Integrated Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D

Category: Digital to Analog Converters - DAC

Brand: Maxim Integrated

Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D

Technical Parameters

Application	General Purpose
Brand	Maxim Integrated
Category	Digital to Analog Converters - DAC
Data Tier	General Description
Description	Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Analog Devices / Maxim Integrated
Packaging	Tube
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	66

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MAX5250AEAP+ Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Analog-Devices-Maxim-Integrated/MAX5250AEAP%2b?qs=9Cj2FLRihcOOMsDL2upVVw%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MAX5250AEAP+ Application and Selection Guide

MAX5250AEAP+ Model and Manufacturer Information

MAX5250AEAP+, a Digital to Analog Converters - DAC manufactured by Maxim Integrated: MAX5250AEAP+ helps you confirm the specific model, while Maxim Integrated helps you confirm the product source. If you are selecting a part, you can first check whether MAX5250AEAP+ meets your requirements, then check whether Maxim Integrated matches your expectations, and then refer to Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D for further evaluation.

MAX5250AEAP+ Product Parameters and Description

The main parameters of Maxim Integrated's Digital to Analog Converters - DAC product MAX5250AEAP+ include Digital to Analog Converters - DAC Low-Power, Quad, 10-Bit Voltage-Output D. This is a Digital to Analog Converters - DAC produced by Maxim Integrated, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MAX5250AEAP+ Application and Selection Reference

Maxim Integrated's Digital to Analog Converters - DAC product MAX5250AEAP+ has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MAX5250AEAP+ is a Digital to Analog Converters - DAC solution worth considering, and manufacturer Maxim Integrated provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MAX5250AEAP+

Designers looking for MAX5250AEAP+ recommended parts can evaluate the following options. MAX5250AEAP+ selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MAX14931BASE+	Maxim Integrated	DGTL ISO 2.75KV GEN PURP 16SOIC
MAX328ETE+T	Maxim Integrated	IC MULTIPLEXER 8X1 16TQFN
LM4040DIM3-2.5+T	Maxim Integrated	IC VREF SHUNT 2.5V SOT23-3

EZKEY can provide MAX5250AEAP+ recommended part comparison data and engineering samples for evaluation.