Question 1

What are the key features of Maxim Integrated MAX481ESA+T?

EZKEY · Accepted Answer

This product belongs to the RS-422/RS-485 Interface IC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Maxim Integrated with full traceability.

Question 2

What are the main application scenarios for MAX481ESA+T?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does MAX481ESA+T work?

EZKEY · Accepted Answer

This device follows established RS-422/RS-485 Interface IC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of MAX481ESA+T?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for MAX481ESA+T?

EZKEY · Accepted Answer

The global RS-422/RS-485 Interface IC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Maxim Integrated MAX481ESA+T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of MAX481ESA+T?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Maxim Integrated provides full technical support and reference designs.

Application	General Purpose
Brand	Maxim Integrated
Category	RS-422/RS-485 Interface IC
Data Tier	General Description
Description	RS-422/RS-485 Interface IC Low-Power, Slew-Rate-Limited RS-485/RS-4
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Analog Devices / Maxim Integrated
Packaging	Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	2500

Recommended Part	Brand	Description
MAX5094DAUA+T	Maxim Integrated	IC REG CTRLR MULT TOPOLOGY 8UMAX
MAX4896ATP+T	Maxim Integrated	IC RELAY/LOAD DRVR 8CHAN 20-TQFN
MAX13223EEUP+	Maxim Integrated	IC TXRX RS-232 2TX/2RX 20-TSSOP

MAX481ESA+T | Maxim Integrated RS-422/RS-485 Interface IC Low-Power, Slew-Rate-Limited RS-485/RS-4

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

MAX481ESA+T Application and Selection Guide

MAX481ESA+T Model and Manufacturer Information

MAX481ESA+T Product Parameters and Description

MAX481ESA+T Application and Selection Reference

Recommended Part Numbers for MAX481ESA+T