What are the key features of Maxim Integrated MAX44290ANT+T?

This product belongs to the Operational Amplifiers - Op Amps category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Maxim Integrated with full traceability.

What are the main application scenarios for MAX44290ANT+T?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MAX44290ANT+T work?

This device follows established Operational Amplifiers - Op Amps design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MAX44290ANT+T?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MAX44290ANT+T?

The global Operational Amplifiers - Op Amps market is growing at ~6-8% CAGR, with particularly strong demand in power management. Maxim Integrated MAX44290ANT+T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MAX44290ANT+T?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Maxim Integrated provides full technical support and reference designs.

MAX44290ANT+T Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail- by Maxim Integrated

MAX44290ANT+T | Maxim Integrated Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail-

Category: Operational Amplifiers - Op Amps

Brand: Maxim Integrated

Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail-

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail-

Technical Parameters

Application	General Purpose
Brand	Maxim Integrated
Category	Operational Amplifiers - Op Amps
Data Tier	General Description
Description	Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail-
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Analog Devices / Maxim Integrated
Packaging	Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MAX44290ANT+T Application and Selection Guide

MAX44290ANT+T Model and Manufacturer Information

MAX44290ANT+T, a Operational Amplifiers - Op Amps manufactured by Maxim Integrated: MAX44290ANT+T helps you confirm the specific model, while Maxim Integrated helps you confirm the product source. If you are selecting a part, you can first check whether MAX44290ANT+T meets your requirements, then check whether Maxim Integrated matches your expectations, and then refer to Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail- for further evaluation.

MAX44290ANT+T Product Parameters and Description

The main parameters of Maxim Integrated's Operational Amplifiers - Op Amps product MAX44290ANT+T include Operational Amplifiers - Op Amps 1.8V, 15MHz Low-Offset, Low-Power, Rail-. This is a Operational Amplifiers - Op Amps produced by Maxim Integrated, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MAX44290ANT+T Application and Selection Reference

Maxim Integrated's Operational Amplifiers - Op Amps product MAX44290ANT+T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MAX44290ANT+T is a Operational Amplifiers - Op Amps solution worth considering, and manufacturer Maxim Integrated provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MAX44290ANT+T

Designers looking for MAX44290ANT+T recommended parts can evaluate the following options. MAX44290ANT+T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MAX809REXR+T	Maxim Integrated	IC RESET CIRC MPU SC70-3
MAX6126AASA21+	Maxim Integrated	IC VREF SERIES 2.048V 8SOIC
MAX232ESE+	Maxim Integrated	IC RS-232 DRVR/RCVR 16-SOIC

EZKEY can provide MAX44290ANT+T recommended part comparison data and engineering samples for evaluation.