What are the key features of Maxim Integrated MAX44246AUA+T?

This product belongs to the Precision Amplifiers category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Maxim Integrated with full traceability.

What are the main application scenarios for MAX44246AUA+T?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does MAX44246AUA+T work?

This device follows established Precision Amplifiers design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of MAX44246AUA+T?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for MAX44246AUA+T?

The global Precision Amplifiers market is growing at ~6-8% CAGR, with particularly strong demand in power management. Maxim Integrated MAX44246AUA+T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of MAX44246AUA+T?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Maxim Integrated provides full technical support and reference designs.

MAX44246AUA+T Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps by Maxim Integrated

MAX44246AUA+T | Maxim Integrated Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps

Category: Precision Amplifiers

Brand: Maxim Integrated

Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps

Technical Parameters

Application	General Purpose
Brand	Maxim Integrated
Category	Precision Amplifiers
Data Tier	General Description
Description	Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Analog Devices / Maxim Integrated
Packaging	Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 MAX44246AUA+T Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Analog-Devices-Maxim-Integrated/MAX44246AUA%2bT?qs=NHTRUjBBRiM8aXJDFn8iCw%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MAX44246AUA+T Application and Selection Guide

MAX44246AUA+T Model and Manufacturer Information

MAX44246AUA+T, a Precision Amplifiers manufactured by Maxim Integrated: MAX44246AUA+T helps you confirm the specific model, while Maxim Integrated helps you confirm the product source. If you are selecting a part, you can first check whether MAX44246AUA+T meets your requirements, then check whether Maxim Integrated matches your expectations, and then refer to Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps for further evaluation.

MAX44246AUA+T Product Parameters and Description

The main parameters of Maxim Integrated's Precision Amplifiers product MAX44246AUA+T include Precision Amplifiers 36V, Low-Noise,Precision, Dual Op Amps. This is a Precision Amplifiers produced by Maxim Integrated, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MAX44246AUA+T Application and Selection Reference

Maxim Integrated's Precision Amplifiers product MAX44246AUA+T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MAX44246AUA+T is a Precision Amplifiers solution worth considering, and manufacturer Maxim Integrated provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MAX44246AUA+T

Designers looking for MAX44246AUA+T recommended parts can evaluate the following options. MAX44246AUA+T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MAX6746KA31+T	Maxim Integrated	IC RESET MPU W/ADJ RESET SOT23-8
MAX232CWE+T	Maxim Integrated	IC 2DVR/2RCVR RS232 5V 16-SOIC
MAX14935EAWE+T	Maxim Integrated	Digital Isolators 4-ch (3/1), 25Mb/s, 5KV Digital Isolator (Default Output=L)

EZKEY can provide MAX44246AUA+T recommended part comparison data and engineering samples for evaluation.