LTV-814S-TA1 Application and Selection Guide
LTV-814S-TA1 Model and Manufacturer Information
LTV-814S-TA1, a General Purpose manufactured by Lite-On Inc: LTV-814S-TA1 helps you confirm the specific model, while Lite-On Inc helps you confirm the product source. If you are selecting a part, you can first check whether LTV-814S-TA1 meets your requirements, then check whether Lite-On Inc matches your expectations, and then refer to 输入电压类型:AC,DC 输出类型:光电三极管 输出通道数:1 正向压降:1.2V 输出电流:50mA 接收端电压:35V 集射极饱和电压(Vce(sat)@Ic,IF):100mV@1mA,20mA for further evaluation.
LTV-814S-TA1 Product Parameters and Description
The main parameters of Lite-On Inc's General Purpose product LTV-814S-TA1 include 输入电压类型:AC,DC 输出类型:光电三极管 输出通道数:1 正向压降:1.2V 输出电流:50mA 接收端电压:35V 集射极饱和电压(Vce(sat)@Ic,IF):100mV@1mA,20mA. This is a General Purpose produced by Lite-On Inc, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
LTV-814S-TA1 Application and Selection Reference
Lite-On Inc's General Purpose product LTV-814S-TA1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LTV-814S-TA1 is a General Purpose solution worth considering, and manufacturer Lite-On Inc provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for LTV-814S-TA1
Designers looking for LTV-814S-TA1 recommended parts can evaluate the following options. LTV-814S-TA1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| LTST-C190CKT |
Lite-On Inc |
|
LED指示灯 LED0603 Red Single 638nm 10mcd 100mW |
| LTST-S270GKT |
Lite-On Inc |
|
标准LED-SMD Green Clear 569nm |
| LTSA-C170KEKT |
Lite-On Inc |
|
Displays Module 1DIGIT 8LED Green CC 10-Pin DIP Module |
EZKEY can provide LTV-814S-TA1 recommended part comparison data and engineering samples for evaluation.