What are the key features of Analog Devices LT1219CS8?

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Analog Devices with full traceability.

What are the main application scenarios for LT1219CS8?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does LT1219CS8 work?

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of LT1219CS8?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for LT1219CS8?

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Analog Devices LT1219CS8 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of LT1219CS8?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Analog Devices provides full technical support and reference designs.

LT1219CS8 LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C by Analog Devices

LT1219CS8 | Analog Devices LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C

Category: General Purpose

Brand: Analog Devices

LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C

Technical Parameters

Application	General Purpose
Brand	Analog Devices
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LT1219CS8 Application and Selection Guide

LT1219CS8 Model and Manufacturer Information

LT1219CS8, a General Purpose manufactured by Analog Devices: LT1219CS8 helps you confirm the specific model, while Analog Devices helps you confirm the product source. If you are selecting a part, you can first check whether LT1219CS8 meets your requirements, then check whether Analog Devices matches your expectations, and then refer to LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C for further evaluation.

LT1219CS8 Product Parameters and Description

The main parameters of Analog Devices's General Purpose product LT1219CS8 include LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C. This is a General Purpose produced by Analog Devices, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LT1219CS8 Application and Selection Reference

Analog Devices's General Purpose product LT1219CS8 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LT1219CS8 is a General Purpose solution worth considering, and manufacturer Analog Devices provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LT1219CS8

Designers looking for LT1219CS8 recommended parts can evaluate the following options. LT1219CS8 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LTC1760CFW#PBF	ANALOG DEVICES
LT8301IS5#TRPBF	Analog Devices	Switching Voltage Regulators 42VIN uP No-Opto Iso Fly Conv w/ 65V/1.2
LTC2950CTS8-2#TRPBF	Analog Devices	Supervisory Circuits PB On/Off Cntr

EZKEY can provide LT1219CS8 recommended part comparison data and engineering samples for evaluation.

LT1219CS8 | Analog Devices LT1219 - Precision Rail-to-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: 0&deg;C to 70&deg;C