What are the key features of Texas Instruments LT1004IDR-2-5?

This product belongs to the Voltage References category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for LT1004IDR-2-5?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does LT1004IDR-2-5 work?

This device follows established Voltage References design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of LT1004IDR-2-5?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for LT1004IDR-2-5?

The global Voltage References market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments LT1004IDR-2-5 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of LT1004IDR-2-5?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

LT1004IDR-2-5 Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5 by Texas Instruments

LT1004IDR-2-5 | Texas Instruments Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5

Category: Voltage References

Brand: Texas Instruments

Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5

Technical Parameters

Application	General Purpose
Brand	Texas Instruments
Category	Voltage References
Data Tier	General Description
Description	Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Reel
Product Type	Integrated Circuit
RoHS	Compliant
Series	TI
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LT1004IDR-2-5 Application and Selection Guide

LT1004IDR-2-5 Model and Manufacturer Information

LT1004IDR-2-5, a Voltage References manufactured by Texas Instruments: LT1004IDR-2-5 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether LT1004IDR-2-5 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5 for further evaluation.

LT1004IDR-2-5 Product Parameters and Description

The main parameters of Texas Instruments's Voltage References product LT1004IDR-2-5 include Voltage References Micropwr Integrated Precision A 595-LT10 A 595-LT1004ID-2-5. This is a Voltage References produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LT1004IDR-2-5 Application and Selection Reference

Texas Instruments's Voltage References product LT1004IDR-2-5 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LT1004IDR-2-5 is a Voltage References solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LT1004IDR-2-5

Designers looking for LT1004IDR-2-5 recommended parts can evaluate the following options. LT1004IDR-2-5 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TMS320F28335PGFACA	Texas Instruments	Digital Signal Processors & Controllers - DSP, DSC Digital Signal Controller
TS5A3167DCKRG4	Texas Instruments	IC SWITCH SPST SC70-5
UCC29002DR/1	Texas Instruments	Power Management Specialized - PMIC Adv 8-pin Load Share Cntrlr A 595-UCC290 A 595-UCC29002D/1

EZKEY can provide LT1004IDR-2-5 recommended part comparison data and engineering samples for evaluation.