What are the key features of Maxim Integrated LM4050CEM3-2.1+T?

This product belongs to the Voltage References category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Maxim Integrated with full traceability.

What are the main application scenarios for LM4050CEM3-2.1+T?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does LM4050CEM3-2.1+T work?

This device follows established Voltage References design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of LM4050CEM3-2.1+T?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for LM4050CEM3-2.1+T?

The global Voltage References market is growing at ~6-8% CAGR, with particularly strong demand in power management. Maxim Integrated LM4050CEM3-2.1+T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of LM4050CEM3-2.1+T?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Maxim Integrated provides full technical support and reference designs.

LM4050CEM3-2.1+T Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages by Maxim Integrated

LM4050CEM3-2.1+T | Maxim Integrated Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages

Category: Voltage References

Brand: Maxim Integrated

Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages

Technical Parameters

Application	General Purpose
Brand	Maxim Integrated
Category	Voltage References
Data Tier	General Description
Description	Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	Analog Devices / Maxim Integrated
Packaging	Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LM4050CEM3-2.1+T Application and Selection Guide

LM4050CEM3-2.1+T Model and Manufacturer Information

LM4050CEM3-2.1+T, a Voltage References manufactured by Maxim Integrated: LM4050CEM3-2.1+T helps you confirm the specific model, while Maxim Integrated helps you confirm the product source. If you are selecting a part, you can first check whether LM4050CEM3-2.1+T meets your requirements, then check whether Maxim Integrated matches your expectations, and then refer to Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages for further evaluation.

LM4050CEM3-2.1+T Product Parameters and Description

The main parameters of Maxim Integrated's Voltage References product LM4050CEM3-2.1+T include Voltage References 50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages. This is a Voltage References produced by Maxim Integrated, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LM4050CEM3-2.1+T Application and Selection Reference

Maxim Integrated's Voltage References product LM4050CEM3-2.1+T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LM4050CEM3-2.1+T is a Voltage References solution worth considering, and manufacturer Maxim Integrated provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LM4050CEM3-2.1+T

Designers looking for LM4050CEM3-2.1+T recommended parts can evaluate the following options. LM4050CEM3-2.1+T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MAX920EUK+T	Maxim Integrated	IC COMPARATOR BTR SOT23-5
MAX9122EUE+	Maxim Integrated	IC LINE RCVR LVDS QUAD 16TSSOP
MAX6018AEUR12+T	Maxim Integrated	IC VREF SERIES PREC SOT-23-3

EZKEY can provide LM4050CEM3-2.1+T recommended part comparison data and engineering samples for evaluation.