Question 1

What are the key features of Texas Instruments LM26LVCISD-135/NOPB?

EZKEY · Accepted Answer

This product belongs to the Board Mount Temperature Sensors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

Question 2

What are the main application scenarios for LM26LVCISD-135/NOPB?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does LM26LVCISD-135/NOPB work?

EZKEY · Accepted Answer

This device follows established Board Mount Temperature Sensors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of LM26LVCISD-135/NOPB?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for LM26LVCISD-135/NOPB?

EZKEY · Accepted Answer

The global Board Mount Temperature Sensors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments LM26LVCISD-135/NOPB is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of LM26LVCISD-135/NOPB?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

Category	Board Mount Temperature Sensors
Description	Board Mount Temperature Sensors 1.6V LLP-6 Temp Swit ch & Sensor A 926-L A 926-L26LVCISDX135NPB
Manufacturer	Texas Instruments
Packaging	Reel
Standard Pack Qty	1000

Recommended Part	Brand	Description
LM25007MM/NOPB	Texas Instruments	IC REG BUCK ADJ 0.5A 8VSSOP
LM25143RHAR	Texas Instruments	Switching Controllers 3.5-V to 42-V low-IQ, dual output, stackable synchronous buck DC-DC controller
LM2717MTX-ADJ/NOPB	Texas Instruments	IC REG BUCK 3.3V/ADJ DL 24-TSSOP

LM26LVCISD-135/NOPB | Texas Instruments Board Mount Temperature Sensors 1.6V LLP-6 Temp Swit ch & Sensor A 926-L A 926-L26LVCISDX135NPB

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

LM26LVCISD-135/NOPB Application and Selection Guide

LM26LVCISD-135/NOPB Model and Manufacturer Information

LM26LVCISD-135/NOPB Product Parameters and Description

LM26LVCISD-135/NOPB Application and Selection Reference

Recommended Part Numbers for LM26LVCISD-135/NOPB