Question 1

What are the key features of ISSI IS25WP064D-JBLE?

EZKEY · Accepted Answer

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by ISSI with full traceability.

Question 2

What are the main application scenarios for IS25WP064D-JBLE?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does IS25WP064D-JBLE work?

EZKEY · Accepted Answer

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of IS25WP064D-JBLE?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for IS25WP064D-JBLE?

EZKEY · Accepted Answer

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. ISSI IS25WP064D-JBLE is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of IS25WP064D-JBLE?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, ISSI provides full technical support and reference designs.

Application	General Purpose
Brand	ISSI
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Recommended Part	Brand	Description
IS43TR16128D-125KBLI-TR	ISSI	DRAM 2G, 1.5V, DDR3, 128Mx16, 1600MT/s @ 11-11-11, 96 ball BGA (9mm x13mm) RoHS, IT, T&R
IS43TR81024BL-107MBLI	ISSI	DRAM 8G, 1.35V, DDR3L, 1Gx8, 1866MT/s at 13-13-13, 78 ball BGA (10mm x 14mm) RoHS, IT
IS42S16400J-6TLT	ISSI	//

IS25WP064D-JBLE | ISSI Flash Memory 64M-bit 1.8V 166MHz Serial 8-Pin SOIC - Trays

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

IS25WP064D-JBLE Application and Selection Guide

IS25WP064D-JBLE Model and Manufacturer Information

IS25WP064D-JBLE Product Parameters and Description

IS25WP064D-JBLE Application and Selection Reference

Recommended Part Numbers for IS25WP064D-JBLE