Question 1

What are the key features of Vishay Dale IHLP4040DZER6R8M8A?

EZKEY · Accepted Answer

This product belongs to the Power Inductors - SMD category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Dale with full traceability.

Question 2

What are the main application scenarios for IHLP4040DZER6R8M8A?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does IHLP4040DZER6R8M8A work?

EZKEY · Accepted Answer

This device follows established Power Inductors - SMD design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of IHLP4040DZER6R8M8A?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for IHLP4040DZER6R8M8A?

EZKEY · Accepted Answer

The global Power Inductors - SMD market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Dale IHLP4040DZER6R8M8A is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of IHLP4040DZER6R8M8A?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Dale provides full technical support and reference designs.

Application	General Purpose
Brand	Vishay Dale
Category	Power Inductors - SMD
Data Tier	General Description
Description	Power Inductors - SMD 6.8uH 20% Automotive
Lead Free	Yes
Manufacturer	Vishay / Dale
Mounting Type	Surface Mount
Operating Temperature	-55 to +150 C
Packaging	Tape & Reel
Product Type	Electronic Component
RoHS	Compliant
Series	Vishay
Standard Pack Qty	500

Recommended Part	Brand	Description
RL07S510GB14	Vishay Dale	RES 51 OHM 1/4W 2% AXIAL
Y08560R10000F9W	Vishay Dale	RES 0.1 OHM 1W 2516 WIDE
MSP06A011K00GEJ	Vishay Dale	RES ARRAY 5 RES 1K OHM 6SIP

IHLP4040DZER6R8M8A | Vishay Dale Power Inductors - SMD 6.8uH 20% Automotive

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

IHLP4040DZER6R8M8A Application and Selection Guide

IHLP4040DZER6R8M8A Model and Manufacturer Information

IHLP4040DZER6R8M8A Product Parameters and Description

IHLP4040DZER6R8M8A Application and Selection Reference

Recommended Part Numbers for IHLP4040DZER6R8M8A