What are the key features of TDK Corporation ICM-20649?

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by TDK Corporation with full traceability.

What are the main application scenarios for ICM-20649?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ICM-20649 work?

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ICM-20649?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ICM-20649?

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. TDK Corporation ICM-20649 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ICM-20649?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, TDK Corporation provides full technical support and reference designs.

ICM-20649 IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications by TDK Corporation

ICM-20649 | TDK Corporation IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications

Category: General Purpose

Brand: TDK Corporation

IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications

Technical Parameters

Application	General Purpose
Brand	TDK Corporation
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Electronic Component
RoHS	Compliant
Series	TDK

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ICM-20649 Application and Selection Guide

ICM-20649 Model and Manufacturer Information

ICM-20649, a General Purpose manufactured by TDK Corporation: ICM-20649 helps you confirm the specific model, while TDK Corporation helps you confirm the product source. If you are selecting a part, you can first check whether ICM-20649 meets your requirements, then check whether TDK Corporation matches your expectations, and then refer to IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications for further evaluation.

ICM-20649 Product Parameters and Description

The main parameters of TDK Corporation's General Purpose product ICM-20649 include IMU-惯性测量单元 Wide-Range 6-Axis MEMS MotionTracking Device for Sports and High Impact Applications. This is a General Purpose produced by TDK Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ICM-20649 Application and Selection Reference

TDK Corporation's General Purpose product ICM-20649 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ICM-20649 is a General Purpose solution worth considering, and manufacturer TDK Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ICM-20649

Designers looking for ICM-20649 recommended parts can evaluate the following options. ICM-20649 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
IQL24050A033V-009-R	TDK Corporation	隔离式直流-直流转换器（通孔型） Input 24VDC 3.3V 50A 165W NLog
MLK1005S1N8ST000	TDK Corporation	FIXED IND 1.8NH 500MA 170 MOHM
HHM1522B1	TDK Corporation	XFRMR BALUN RF EGSM/TX-RX SMD

EZKEY can provide ICM-20649 recommended part comparison data and engineering samples for evaluation.